ISO 13266:2022-无压地下排水和排污用热塑性管道系统.检查室和人孔用热塑塑料竖井或立管.抗表面和交通荷载的测定-国家数字标准馆

现行 ISO 13266:2022

到馆阅读

收藏跟踪

购买正版

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of resistance against surface and traffic loading 无压地下排水和排污用热塑性管道系统.检查室和人孔用热塑塑料竖井或立管.抗表面和交通荷载的测定

发布日期： 2022-06-15

本文件规定了检查井和人孔组件上部组件抵抗地面和交通荷载的测试方法。
它不适用于测试盖和框架的要求。EN？中规定了这些要求124-1或其他标准，取决于材料。
注意上部组件组件通常包括轴或立管、锥体、伸缩适配器和近表面组件。

This document specifies a method of testing the resistance of the upper assembly of inspection chambers and manhole components against surface and traffic loading.
It is not applicable to requirements for testing the cover and frame. Those requirements are specified in EN？124-1 or other standards, depending on the material.
NOTE？Upper assembly components normally include shafts or risers, cones, telescopic adapters and near surface components.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 93.030土木工程 - 外部污水排放系统、 23.040.45管道部件和管道 - 塑料配件、 23.040.20管道部件和管道 - 塑料管、 91.140.80建筑物中的设施 - 排水系统

关联关系

研制信息

归口单位： ISO/TC 138/SC 1

相似标准/计划/法规

BS EN ISO 13263-2017

Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for impact strength
无压地下排水和下水道用热塑性塑料管道系统热塑性塑料配件冲击强度试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for impact strength
无压地下排水和排污用热塑性塑料管道系统——热塑性塑料配件——冲击强度试验方法

BS EN ISO 13262-2017

Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam
无压地下排水和下水道用热塑性塑料管道系统热塑性塑料螺旋形结构壁管接缝抗拉强度的测定

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics spirally-formed structured-wall pipes — Determination of the tensile strength of a seam
无压地下排水和排污用热塑性塑料管道系统——热塑性螺旋成型结构壁管——接缝抗拉强度的测定

BS EN ISO 13264-2017

Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings
无压地下排水和下水道用热塑性塑料管道系统热塑性塑料配件装配配件机械强度或柔性的试验方法

DIN EN ISO 13263

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
无压地下排水和下水道用热塑性塑料管道系统.热塑性塑料配件.冲击强度试验方法（ISO 13263-2010）

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance
无压地下排水和排污用热塑性管道系统.热塑性检查室和人孔底座.抗屈曲试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness
无压地下排水和排污用热塑性管道系统.检查室和人孔用热塑塑料竖井或立管.环刚度的测定

BS 09/30198124 DC

BS ISO 13263. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for impact strength
BS ISO 13263 无压地下排水和下水道用热塑性塑料管道系统热塑性塑料配件冲击强度试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for mechanical strength or flexibility of fabricated fittings
无压地下排水和排污用热塑性塑料管道系统——热塑性塑料配件——装配配件机械强度或柔性的试验方法

BS 05/30132762 DC

prEN 15229. Plastics piping systems. Piping systems for non-pressure underground drainage and sewerage. Performance requirements for thermoplastics manholes and inspection chambers
普伦15229 塑料管道系统无压地下排水和污水管道系统热塑性人孔和检查室的性能要求

Plastics piping systems for non-pressure underground drainage and sewerage — Polypropylene (PP)
无压地下排水和排污用塑料管道系统——聚丙烯（PP）

Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE)
无压地下排水和排污用塑料管道系统——聚乙烯（PE）

BS ISO 13260-2010

Thermoplastics piping systems for non-pressure underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading
无压地下排水和下水道用热塑性塑料管道系统耐组合温度循环和外部负载的试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading
无压地下排水和排污用热塑性塑料管道系统——耐组合温度循环和外部负载的试验方法

DIN EN ISO 13262

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
无压地下排水和污水用热塑性塑料管道系统.热塑性螺旋成型结构壁管.接缝抗拉强度的测定（ISO 13262-2010）

BS 09/30198121 DC

BS ISO 13262. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam
BS ISO 13262 无压地下排水和下水道用热塑性塑料管道系统热塑性塑料螺旋形结构壁管接缝抗拉强度的测定

BS EN 12666-1-2005+A1-2011

Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE)-Specifications for pipes, fittings and the system
无压地下排水和排污用塑料管道系统聚乙烯（PE）管道、配件和系统规范

BS EN ISO 11296-2-2018

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks-Lining with continuous pipes
地下无压排水和污水管网改造用塑料管道系统

DIN EN ISO 13264

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
无压地下排水和下水道用热塑性塑料管道系统.热塑性配件.装配配件的机械强度或柔性试验方法（ISO 13264-2010）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统