月球空间坐标系
The lunar coordinate system

2013-12-17

月球探测器与地面应用系统接口技术要求
Requirements for interface between lunar probe and ground application system

2013-01-04

月球探测器与地面测控系统接口技术要求
Requirements for interface between lunar probe and TT&C system

2013-01-04

Accuracy of coordinate measuring machines - Characteristics and their checking - Coordinate measuring machines with multiple probing systems
坐标测量机的精度.特性及其检验.带多个探测系统的坐标测量机

2008-12-01

Acceptance and reverification tests for coordinate measuring machines (CMM) with non-contacting probing systems
带非接触式探测系统的坐标测量机（CMM）的验收和再鉴定试验

2009-01-01

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS)-CMMs with multiple probing systems
几何产品规范（GPS） 坐标测量系统（CMS）的验收和再鉴定试验

2013-12-31

제품의 형상 명세(GPS) — 좌표 측정기(CMM)의 인수 시험과 재검증 시험 — 제9부: 다중 프로빙 시스템을 이용한 좌표 측정기
产品几何技术规范（GPS）.坐标测量系统（CMS）的验收和再鉴定试验.第9部分:带多个探测系统的坐标测量机

2017-01-10

제품의 형상 명세(GPS) — 좌표 측정기(CMM)의 인수 시험과 재검증 시험 — 제9부: 다중 프로빙 시스템을 이용한 좌표 측정기
几何产品规格（Gps） - 用于坐标测量系统（Cms）的验收和再验证测试 - 第9部分:具有多个探测系统的系统

2017-01-10

产品几何技术规范（GPS） 坐标测量系统（CMS）的验收检测和复检检测 第9部分：配备多种探测系统的坐标测量机
Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 9:CMMs with multiple probing systems

2022-12-30

Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 9: CMMs with multiple probing systems
几何产品规范（GPS）——坐标测量系统（CMS）的验收和再鉴定试验第9部分:带多个探测系统的CMM

2013-11-28

产品几何技术规范（GPS） 坐标测量系统（CMS）的验收检测和复检检测 第7部分：配置影像探测系统的坐标测量机
Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 7: CMMs equipped with imaging probing systems

2022-12-30

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)-CMMs equipped with imaging probing systems
几何产品规范（GPS） 坐标测量机（CMM）的验收和再鉴定试验

2011-06-30

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS)-Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode
几何产品规范（GPS） 坐标测量系统（CMS）的验收和再鉴定试验

2020-04-21

제품의 형상 명세(GPS) — 좌표측정기 (CMM)의 인수 시험과 재검증 시험 —제7부: 이미지 프로빙 시스템을 갖춘 좌표측정기
几何产品规格（GPS） - 坐标测量机（CMM）的验收和再验证测试 - 第7部分:配备成像探测系统的CMM

2020-12-31

Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 7: CMMs equipped with imaging probing systems
几何产品规范（GPS）——坐标测量机（CMM）的验收和再鉴定试验第7部分:配备成像探测系统的CMM

2011-05-23

产品几何技术规范（GPS） 坐标测量机的验收检测和复检检测 第901部分：配置多影像探测系统的坐标测量机
Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 901: CMMs with multiple imaging probing system

2020-03-31

Geometrical product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013)
产品几何技术规范（GPS）.坐标测量系统（CMS）的验收和再认证试验.第9部分:带多个探测系统的CMM（ISO 10360-9-2013）；德文版EN ISO 10360-9:2013

2014-04-01

Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode
几何产品规范（GPS）.坐标测量系统（CMS）的验收和再鉴定试验.第5部分:使用离散点和/或扫描测量模式的单触针和多触针接触探测系统的坐标测量机（CMM）（ISO 10360-5-2020）

2020-03-31

Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
几何产品规范（GPS） 使用单触针和多触针接触探测系统的坐标测量机（CMM）试验不确定度评定指南

2016-09-30

Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
几何产品规格（Gps） - 坐标测量机评估指南（Cmm）使用单个和多个触针接触探测系统测量不确定度

2016-08-31