1.1 本规范涵盖了通用压力和差压传感器的要求。 1.2 海军舰艇应用的特殊要求包含在补充要求S1、S2和S3中。 1.3 以国际单位表示的数值视为标准值。括号中给出的值是以英寸-磅为单位的数学转换，仅供参考，不被视为标准值。如果需要指定信息，则应以国际单位表示。 1.4 本标准并不旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This specification covers the requirements for pressure and differential pressure transducers for general applications. 1.2 Special requirements for naval shipboard applications are included in Supplementary Requirements S1, S2, and S3. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. Where information is to be specified, it shall be stated in SI units. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.