现行

MIL MIL-W-45223A

WELDING, SPOT, HARDENABLE STEELS (NO S/S DOCUMENT) (SUPERSEDING MIL-W-45223)
可硬化点焊钢（无S/S文件）（代替MIL-W-45223）

1968-06-28

现行

MIL MIL-W-45223A Notice 2-Cancellation

WELDING, SPOT, HARDENABLE STEELS (NO S/S DOCUMENT) (SUPERSEDING MIL-W-45223)
可硬化钢点焊（无S/S文件）（代替MIL-W-45223）

1996-06-17

现行

MIL MIL-W-45223A Notice 1-Validation

WELDING, SPOT, HARDENABLE STEELS (NO S/S DOCUMENT) (SUPERSEDING MIL-W-45223)
可硬化钢点焊（无S/S文件）（代替MIL-W-45223）

1994-03-22

现行

MIL MIL-STD-1261C

ARC WELDING PROCEDURES FOR CONSTRUCTIONAL STEELS(SUPERSEDING MIL-STD-1261B) (NO S/S DOCUMENT)
结构钢电弧焊规程（代替MIL-STD-1261B）（无S/S文件）

1988-01-20

现行

MIL MIL-STD-1261C Notice 4-Inactivation

ARC WELDING PROCEDURES FOR CONSTRUCTIONAL STEELS(SUPERSEDING MIL-STD-1261B) (NO S/S DOCUMENT)
结构钢电弧焊工艺（取代MIL-STD-1261B）（无S/S文件）

1998-05-14

现行

MIL MIL-STD-1261C Notice 3-Reactivation

ARC WELDING PROCEDURES FOR CONSTRUCTIONAL STEELS(SUPERSEDING MIL-STD-1261B) (NO S/S DOCUMENT)
结构钢电弧焊工艺（取代MIL-STD-1261B）（无S/S文件）

1998-05-12

现行

MIL MIL-STD-1261C Notice 5-Cancellation

ARC WELDING PROCEDURES FOR CONSTRUCTIONAL STEELS(SUPERSEDING MIL-STD-1261B) (NO S/S DOCUMENT)
结构钢电弧焊工艺（取代MIL-STD-1261B）（无S/S文件）

2003-07-28

现行

MIL MIL-STD-1261C Change Notice 1

ARC WELDING PROCEDURES FOR CONSTRUCTIONAL STEELS(SUPERSEDING MIL-STD-1261B) (NO S/S DOCUMENT)
结构钢的ARC焊接程序（取代MIL-STD-1261B）（无S/S文件）

1991-02-05

现行

MIL MIL-C-22521A Amendment 1

CHAIN, OPEN LINK, STEEL, WELDED (FOR MOORING BUOYS) (SUPERSEDING MIL-C-22521) (NO S/S DOCUMENT)
链 开链 钢 焊接（用于运输）（取代MIL-C-22521）（无S/S文件）

1963-10-10

现行

MIL MIL-C-22521A

CHAIN, OPEN LINK, STEEL, WELDED (FOR MOORING BUOYS) (SUPERSEDING MIL-C-22521) (NO S/S DOCUMENT)
焊接钢制开口链环链（用于系泊浮筒）（代替MIL-C-22521）（无S/S文件）

1960-12-09

现行

MIL MIL-S-24251/1A

SHIELD, ELECTRON TUBE, HEAT DISSIPATING, 7 AND 9 PIN, MINIATURE (CLAM SHELL) (SUPERSEDING MIL-S-24251/1) (NO S/S DOCUMENT)
隔热罩 电子管 散热 7针和9针 微型（蛤壳）（取代MIL-S-24251/1）（无S/S文件）

1968-07-01

现行

MIL MIL-S-24251/1A Amendment 2

SHIELD, ELECTRON TUBE, HEAT DISSIPATING, 7 AND 9 PIN, MINIATURE (CLAM SHELL) (SUPERSEDING MIL-S-24251/1) (NO S/S DOCUMENT)
屏蔽 电子管 散热器 7和9针 微型（CLAM SHELL）（取代MIL-S-24251/1）（无S/S文件）

1979-10-03

现行

MIL MIL-S-24251/1A Notice 2-Cancellation

SHIELD, ELECTRON TUBE, HEAT DISSIPATING, 7 AND 9 PIN, MINIATURE (CLAM SHELL) (SUPERSEDING MIL-S-24251/1) (NO S/S DOCUMENT)
散热电子管屏蔽 7和9针 微型（蛤壳）（取代MIL-S-24251/1）（无S/S文件）

2001-02-02

现行

MIL MIL-S-24251/1A Notice 1-Validation

SHIELD, ELECTRON TUBE, HEAT DISSIPATING, 7 AND 9 PIN, MINIATURE (CLAM SHELL) (SUPERSEDING MIL-S-24251/1) (NO S/S DOCUMENT)
散热电子管屏蔽 7和9针 微型（蛤壳）（取代MIL-S-24251/1）（无S/S文件）

1987-10-13

现行

QPL QPL-29576-2

CYLINDERS, STEEL, COMPRESSED GAS, NON-SHATTERABLE, WELDED (SUPERSEDING QPL-29576-1) (S/S BY MIL-C-29576A)
焊接不易碎压缩气体钢瓶（代替QPL-29576-1）（由MIL-C-29576A提供）

1994-12-20

现行

MIL MIL-E-18193B

ELECTRODES, WELDING, CARBON STEEL AND ALLOY STEEL, BARE, COILED (S/S BY MIL-E-23765/4 AND MIL-E-23765/1) (SUPERSEDING MIL-E-18193A)
碳钢和合金钢焊接焊条 裸焊条 盘绕焊条（由MIL-E-23765/4和MIL-E-23765/1提供）（取代MIL-E-18193A）

1974-04-22

现行

MIL MIL-E-18193B Notice 1-Cancellation

ELECTRODES, WELDING, CARBON STEEL AND ALLOY STEEL, BARE, COILED (S/S BY MIL-E-23765/4 AND MIL-E-23765/1) (SUPERSEDING MIL-E-18193A)
电极 焊接 碳钢和合金钢 扁平（MIL-E-23765/4和MIL-E-23765/1的S/S）（取代MIL-E-18193A）

1989-09-15

现行

MIL MIL-S-24149/4C

STUDS, WELDING, TYPE VI, CLASS 1, 2, 3, CARBON STEEL, FOR STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING (SUPERSEDING MIL-S-24149/4B) (S/S BY NASM24149/4)
储能（电容器放电）电弧焊（代替MIL-S-24149/4B）用第VI类1、2、3级碳钢焊接螺柱（由NASM24149/4提供）

1989-03-27

现行

MIL MIL-S-24149/4C Notice 1-Cancellation 1

STUDS, WELDING, TYPE VI, CLASS 1, 2, 3, CARBON STEEL, FOR STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING (SUPERSEDING MIL-S-24149/4B) (S/S BY NASM24149/4)
焊接双头螺栓 VI型 1、2、3级 碳钢 用于储能（电容器放电）电弧焊（取代MIL-S-24149/4B）（根据NASM24149/4 S/S）

2000-06-29

现行

MIL MIL-S-24149/4C Notice 2-Reactivation 1

STUDS, WELDING, TYPE VI, CLASS 1, 2, 3, CARBON STEEL, FOR STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING (SUPERSEDING MIL-S-24149/4B) (S/S BY NASM24149/4)
焊接双头螺栓 VI型 1、2、3级 碳钢 用于储能（电容器放电）电弧焊（取代MIL-S-24149/4B）（根据NASM24149/4 S/S）

2000-08-21