MTI Publication No.32:Pyrophoric Behavior and Combustion of Reactive Metals--国家数字标准馆

现行 MTI Publication No.32:Pyrophoric Behavior and Combustion of Reactive Metals

收藏跟踪

购买正版

发布日期： 1999-01-01

回顾病史，确定可能产生严重放热的环境，并给出修复暴露于潜在自燃条件下的设备的指南。基于广泛的文献搜索和与主要制造商、制造商和用户的讨论。总结了用于化工厂设备的钛、锆和钽的自燃行为的结果。

Reviews case histories, identifies environments subject to severe exothermic creation, and gives guidelines for restoring equipment exposed to potential pyrophoric conditions. Based on an extensive literature search and discussions with major manufacturers, fabricators, and users. Summarizes results of pyrophoric behavior of titanium, zirconium, and tantalum used in chemical plant equipment.

分类信息

发布单位或类别：美国-美国防腐工程师协会

关联关系

研制信息

相似标准/计划/法规

Certification of Welding Inspectors
焊接检验员的认证

DB50/T 757-2018

消防泵自动巡检控制设备网络监管系统

DB50/T 868-2018

安全生产技术规范第2部分：通用要求

DB1404/T 3-2023

康复护理师职业基本要求

ISO/IEC 14882-2015

Information technology -- Programming languages -- C++
信息技术 - 编程语言 - C

IEC 60050-713-1998/AMD3-2018

Amendment 3 - International Electrotechnical Vocabulary (IEV) - Part 713: Radiocommunications: transmitters, receivers, networks and operation
修改件3.国际电工词汇（IEV）.第713部分:无线电通信:发射机、接收机、网络和操作

prEN ISO 19905-1

Petroleum and natural gas industries - Site-specific assessment of mobile offshore units - Part 1: Jack-ups (ISO/DIS 19905-1:2022)
石油和天然气工业移动式海上装置的现场特定评估第1部分:自升式平台

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves for water supply systems
供水管道系统压力下排水和污水管道系统 - 聚乙烯（Pe） - 第4部分:供水系统阀门

prEN ISO 19160-2

Addressing - Part 2: Assigning and maintaining addresses for objects in the physical world (ISO/DIS 19160-2:2022)
寻址第2部分:为物理世界中的对象分配和维护地址

FprEN ISO 3262-18

Extenders - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO/FDIS 3262-18:2023)
填充剂规范和试验方法第18部分:沉淀硅酸钠铝

Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO/DIS 14172:2022)
焊接耗材镍和镍合金手工金属电弧焊用涂敷焊条分类

FprEN ISO 22477-2

Geotechnical investigation and testing - Testing of geotechnical structures - Part 2: Testing of piles: static tension load testing (ISO/FDIS 22477-2:2023)
岩土工程勘察和试验岩土工程结构试验第2部分:桩的试验:静态拉伸载荷试验

prEN ISO 16119-5

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 5: Aerial spray systems (ISO/DIS 16119-5:2021)
农林机械喷雾器的环境要求第5部分:空中喷雾系统

FprEN ISO 22721

Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO/FDIS 22721:2023)
输送带.地下采矿用织物结构的橡胶或塑料覆盖的输送带规范（ISO/FDIS 22721:2023）

Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO/DIS 10468:2022)
玻璃纤维增强热固性塑料管在潮湿或干燥条件下环蠕变性能的测定

Small medical gas cylinders - Pin-index yoke-type valve connections (ISO/FDIS 407:2023)
小型医用气瓶销式分度轭阀连接

Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO/FDIS 7933:2023)
热环境的人类工效学.使用预测热应变的计算对热应力进行分析测定和解释

prEN ISO 11855-8

Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 8: Electrical heating systems (ISO/DIS 11855-8:2022)
建筑环境设计嵌入式辐射加热和冷却系统的设计、尺寸、安装和控制第8部分:电加热系统

Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO/DIS 14919:2023)
热喷涂火焰和电弧喷涂用电线、杆和帘线分类供货技术条件

Cranes - Interface between loader crane and work platform
起重机.装载机起重机和工作平台之间的接口

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统