BS EN 62822-2:2016适用于为以下目的设计的弧焊和相关工艺设备: 专业人士和非专业人士的职业使用。注1:典型的相关工艺为电弧切割和电弧喷涂。本标准规定了人体暴露于磁场的评估程序 由电弧焊产生。它涵盖了以下频率范围内的非热生物效应: 0 Hz至10 MHz，并定义标准化测试场景。注2:本文件通篇使用“磁场”一词来表示“磁场”。注3:对于电场暴露和热效应的评估，应采用 通用标准IEC 62311适用。本标准未定义工作场所风险评估方法 来自电磁场（EMF）。然而，应用 本标准可用于协助工作场所评估。其他标准可能适用于本标准涵盖的产品。 尤其是本标准 不能用于证明与其他设备的电磁兼容性。的确如此 除与人身安全相关的要求外，未规定任何产品安全要求 暴露在电磁场中。交叉引用:IEC 60050-851:2008IEC 60974-1EN 60974-1IEC 60974-6EN 60974-6IEC 61786-1EN 61786-1IEC 61786-2EN 61788-2IEC 62822-1EN 62822-1IEC 62226-1EN 62226-2-1:2004EN 62226-2-1:2005IEC 62311-62311999/519/EC2013/35/IEEE C95。1:2005 IEEE C95。6:2002见C95。本文件的所有修改件均包括在当前购买日期2013时。

BS EN 62822-2:2016 applies to equipment for arc welding and allied processes designed for occupational use by professionals and for use by laymen.NOTE 1 Typical allied processes are electric arc cutting and arc spraying.This standard specifies procedures for the assessment of human exposure to magnetic fields produced by arc welding. It covers non-thermal biological effects in the frequency range from 0 Hz to 10 MHz and defines standardized test scenarios.NOTE 2 The general term "field" is used throughout this document for "magnetic field".NOTE 3 For the assessment of exposure to electric fields and thermal effects, the methods specified in the Generic Standard IEC 62311 apply.This standard does not define methods for workplace assessment regarding the risks arising from electromagnetic fields (EMF). However, the EMF data that results from the application of this standard can be used to assist in workplace assessment.Other standards may apply to products covered by this standard. In particular this standard cannot be used to demonstrate electromagnetic compatibility with other equipment. It does not specify any product safety requirements other than those specifically related to human exposure to electromagnetic fields.Cross References:IEC 60050-851:2008IEC 60974-1EN 60974-1IEC 60974-6EN 60974-6IEC 61786-1EN 61786-1IEC 61786-2EN 61788-2IEC 62822-1EN 62822-1IEC 62226-1EN 62226-1IEC 62226-2-1:2004EN 62226-2-1:2005IEC 62311EN 623111999/519/EC2013/35/EUIEEE C95.1:2005IEEE C95.6:2002IEEE C95.3.1:2010All current amendments available at time of purchase are included with the purchase of this document.