本欧洲标准规定了具有如表1所示的具有高温性能的可焊非合金和合金钢制成的压力设备的扁平产品的要求。 EN 10028-1:2017的要求和定义也适用。 注意一旦本欧洲标准在“欧盟官方公报”（OJEU）根据“2014/68/EU指令”发布，推定符合2014/68/EU指令的基本安全要求（ESR）的限制仅限于此中的材料的技术数据欧洲标准（第1部分和本系列的第2部分），并且不将材料的适当性设置为特定的设备项目。因此，需要对本材料标准中规定的技术数据对本设备的设计要求进行评估，以验证2014/68/EU指令的ESR是否得到满足。

This European Standard specifies requirements for flat products for pressure equipment made of weldable non-alloy and alloy steels with elevated temperature properties as specified in Table 1. The requirements and definitions of EN 10028-1:2017 also apply. NOTE Once this European Standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this European Standard (Part 1 and this Part 2 of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done.