首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 UL 2251
到馆提醒
收藏跟踪
购买正版
Standard for Plugs, Receptacles and Couplers for Electric Vehicles 电动汽车插头、插座和耦合器标准
发布日期: 2017-11-20
请注意:此版本的所有临时修订版将在您购买时提供。第三版电动汽车插头、插座和耦合器标准UL 2251将与ANCE和CSA一起作为三项国家标准发布。
Please note: All interim revisions for this edition available at time of your purchase will be included.This Third Edition of the Standard for Plugs, Receptacles, and Couplers for Electric Vehicles, UL 2251, is being issued as a Trinational Standard with ANCE and CSA.
分类信息
发布单位或类别: 美国-美国保险商实验所
关联关系
研制信息
相似标准/计划/法规
现行
UL Subject 2251
Standard for Plugs, Receptacles, and Couplers for Electric Vehicles (CSDS Proposal, 9/29/2021)
电动汽车插头、插座和耦合器标准(CSDS提案 2021年9月29日)
2021-09-29
现行
CAN/CSA C22.2 NO.282-17(R2022)
Plugs, receptacles, and couplers for electric vehicles, Includes Update No. 1 (2022)
电动汽车用插头、插座和耦合器(符合UL 2251和NMX-J-678-ANCE-2017的三国家标准)
2017-10-31
现行
UL 2251 CRD
Standard for Plugs, Receptacles and Couplers for Electric Vehicles (Certification Requirement Decision, 6/3/2019)
电动汽车插头、插座和耦合器标准(认证要求决定 2019年6月3日)
2019-06-03
现行
SAE J1772_202401
SAE Electric Vehicle and Plug-in Hybrid Electric Vehicle Conductive Charge Coupler
SAE电动汽车和插电式混合动力电动汽车导电充电耦合器
2024-01-22
现行
UNE-EN 62196-1-2004
Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles -- Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c.
插头、插座、车辆耦合器和车辆插孔.电动汽车的传导充电.第1部分:交流250A和直流400A以下电动汽车的充电
2004-06-11
现行
IEC PAS 63472-2023
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Dimensional compatibility description for configuration FF AC/DC contact-tube vehicle coupler
插头、插座、车辆连接器和车辆插孔 电动车辆的传导充电 FF AC/DC接触管车辆耦合器配置的尺寸兼容性描述
2023-05-04
现行
IEC 62196-3-2022
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
插头、插座、车辆连接器和车辆插座.电动车辆的导电充电.第3部分:直流和交流/直流插针和接触管车辆耦合器的尺寸兼容性要求
2022-10-19
现行
KS R IEC 62196-3
플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛 — 전기자동차의 전도성 충전 — 제3부: 직류 및 교류/직류 핀과 접촉 튜브 자동차 커플러에 대한 치수 적합성 요구사항
插头、插座、车辆连接器和车辆插座电动车辆的导电充电第3部分:直流和交流/直流插针和接触管车辆耦合器的尺寸兼容性要求
2024-01-05
现行
DIN IEC 62196-1-DRAFT
Draft Document - Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c. (IEC 23H/222/CD:2010)
文件草案-插头、插座、车辆耦合器和车辆插孔-电动汽车的传导充电-第1部分:交流250 A和直流400 A以下电动汽车的充电(IEC 23H/222/CD:2010)
2010-05-01
现行
KS R IEC 62196-3(2022 Confirm)
플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛?전기자동차의 전도성 충전?제3부: 직류 및 교류/직류 핀과 접촉 튜브 자동차 커플러에 대한 치수 적합성 및 상호 호환성 요구사항
插头、插座、车辆连接器和车辆插孔.电动车辆的传导充电.第3部分:直流和交流/直流插针和接触管车辆耦合器的尺寸兼容性和互换性要求
2017-12-22
现行
KS R IEC 62196-3
플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛?전기자동차의 전도성 충전?제3부: 직류 및 교류/직류 핀과 접촉 튜브 자동차 커플러에 대한 치수 적합성 및 상호 호환성 요구사항
插头 插座 车辆连接器和车辆入口 - 电动车辆的导电充电第3部分:直流的尺寸兼容性和互换性要求 和A.c./d.c 销和接触管车辆耦合器
2017-12-22
现行
NASA KSC-STD-E-0011 Rev.H w/Change 1
Electrical Power Receptacles and Plugs, Standard For, w/ Change 1 (2020-11-02)
电源插座和插头标准 带变更1(2020-11-02)
2020-11-02
现行
IEC 62196-6-2022
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where protection relies on electrical separation
插头、插座、车辆连接器和车辆插孔.电动汽车的传导充电.第6部分:用于直流电动汽车供电设备的直流插脚和接触管车辆耦合器的尺寸兼容性要求 其中保护依赖于电气隔离
2022-04-22
现行
DIN EN 62196-3/A1-DRAFT
Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for DC and AC/DC pin and contact-tube vehicles couplers (IEC 23H/390A/CD:2017); Text in German and English
文件草案——插头、插座、车辆连接器和车辆插孔——电动汽车的传导充电——第3部分:直流和交流/直流针式和接触管式车辆耦合器的尺寸兼容性和互换性要求(IEC 23H/390A/CD:2017);德语和英语文本
2018-06-01
现行
BS EN 3682-006-2013
Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuous-Size 3 receptacle. Product standard
航空航天系列 电气连接器、插头和插座、矩形、可互换插入式、机架到面板、工作温度150°C连续 3号插座 产品标准
2013-01-31
现行
BS EN 3682-008-2013
Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuous-Size 4 receptacle. Product standard
航空航天系列 电气连接器、插头和插座、矩形、可互换插入式、机架到面板、工作温度150°C连续 4号插座 产品标准
2013-01-31
现行
BS EN 3682-005-2013
Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuous-Size 2 plug. Product standard
航空航天系列 电气连接器、插头和插座、矩形、可互换插入式、机架到面板、工作温度150°C连续 2号插头 产品标准
2013-01-31
现行
BS EN 3682-007-2013
Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuous-Size 3 plug. Product standard
航空航天系列 电气连接器、插头和插座、矩形、可互换插入式、机架到面板、工作温度150°C连续 3号插头 产品标准
2013-01-31
现行
BS EN 3682-009-2013
Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuous-Size 4 plug. Product standard
航空航天系列 电气连接器、插头和插座、矩形、可互换插入式、机架到面板、工作温度150°C连续 4号插头 产品标准
2013-01-31
现行
BS EN 3682-004-2012
Aerospace series. Connectors, plug and receptacle, electrical, rect angular, interchangeable insert type, rack to panel, operatingtemperatur e 150°C continuous-Size 2 receptacle. Product standard
航空航天系列 电气连接器 插头和插座 矩形 可互换插入式 机架到面板 工作温度e 150°C连续 2号插座 产品标准
2012-10-31