BS EN 17415-3:2021-区域冷却管直埋冷水管网用粘结单管系统-国家数字标准馆

现行 BS EN 17415-3:2021

到馆阅读

收藏跟踪

购买正版

District cooling pipes. Bonded single pipe systems for directly buried cold water networks-Factory made steel valve assembly for steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene 区域冷却管直埋冷水管网用粘结单管系统

发布日期： 2021-09-07

                本文件规定了用于直埋区域冷却分配系统的工厂制隔热粘结阀组件的要求、设计和试验方法，包括DN 15至DN 1200的钢制阀门、硬质聚氨酯泡沫隔热材料和聚乙烯外壳。购买本文件时可获得的所有当前修订均包含在购买本文件中。

This document specifies requirements, design and test methods for factory made thermally insulated bonded valve assemblies for directly buried district cooling distribution systems, comprising a steel valve from DN 15 to DN 1 200, rigid polyurethane foam insulation and a casing of polyethylene.All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

UNE-EN 14419-2009

District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems
区域供暖管道.直埋热水网络用预绝缘粘结管道系统.监控系统

BS EN 17415-1-2020

District cooling pipes. Bonded single pipe systems for directly buried cold water networks-Factory made pipe assembly of steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
区域冷却管直埋冷水管网用粘结单管系统

BS EN 13941-1-2019+A1-2021

District heating pipes. Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks-Design
区域供暖管道直埋热水管网保温粘结单管和双管系统的设计和安装

BS EN 13941-2-2019+A1-2021

District heating pipes. Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks-Installation
区域供暖管道直埋热水管网保温粘结单管和双管系统的设计和安装

BS EN 17415-2-2021

District cooling pipes. Bonded single pipe systems for directly buried cold water networks-Factory made fitting assemblies of steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
区域冷却管直埋冷水管网用粘结单管系统

District cooling pipes - Bonded single pipe systems for directly buried cold water networks - Part 1: Factory made pipe assembly of steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
区域冷却管.直埋冷水管网用粘结单管系统.第1部分:钢或塑料服务管、聚氨酯隔热和聚乙烯套管的工厂制管道组件

BS EN 14419-2019

District heating pipes. Bonded single and twin pipe systems for buried hot water networks. Surveillance systems
区域供暖管道埋地热水管网用粘结单管和双管系统监视系统

District cooling pipes - Bonded single pipe systems for directly buried cold water networks - Part 2: Factory made fitting assemblies of steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
区域冷却管.直埋冷水管网用粘结单管系统.第2部分:钢或塑料供水管、聚氨酯隔热和聚乙烯套管的工厂制配件组件

District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene
区域供暖管道直埋热水管网用粘结单管系统工厂制造的钢管、聚氨酯保温材料和聚乙烯套管的管道组件

District cooling pipes - Bonded single pipe systems for directly buried cold water networks - Part 3: Factory made steel valve assembly for steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
区域冷却管.直埋冷水管网用粘结单管系统.第3部分:钢或塑料供水管、聚氨酯隔热和聚乙烯套管用工厂制钢阀组件

District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
区域供暖管道直埋热水管网用粘结单管系统工厂制造的钢制供水管道配件、聚氨酯隔热材料和聚乙烯外壳

District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made steel valve assembly for steel service pipes, polyurethane thermal insulation and a casing of polyethylene
区域供暖管道直埋热水管网用粘结单管系统工厂制造的钢制阀门组件用于钢制供水管道、聚氨酯隔热材料和聚乙烯外壳

UNE-EN 253-2010

District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
区域供暖管道.直埋热水网络用预绝缘粘结管道系统.钢制服务管、聚氨酯隔热和聚乙烯外壳的管道组件

UNE-EN 448-2010

District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
区域供暖管道.直埋热水管网用预绝缘粘结管道系统.钢制供水管、聚氨酯隔热和聚乙烯外壳的配件组件

UNE-EN 489-2010

District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
区域供暖管道.直埋热水管网用预绝缘粘结管道系统.钢制供水管、聚氨酯隔热和聚乙烯外壳的接头组件

UNE-EN 488-2005

District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
区域供暖管道.直埋热水管网用预绝缘粘结管道系统.钢制供水管道、聚氨酯隔热和聚乙烯外壳用钢阀组件

BS EN 15698-1-2019

District heating pipes. Bonded twin pipe systems for directly buried hot water networks-Factory made twin pipe assembly of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
区域供暖管道直埋热水管网的粘结双管系统工厂制造的钢管、聚氨酯保温材料和一个聚乙烯套管的双管组件

BS EN 17414-2-2020

District cooling pipes. Factory made flexible pipe systems-Bonded system with plastic service pipes; requirements and test methods
区域冷却管工厂制造的软管系统

UNE-EN 15698-1-2010

District heating pipes - Preinsulated bonded twin pipe systems for directly buried hot water networks - Part 1: Twin pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
区域供暖管道.直埋热水网络用预绝缘粘结双管系统.第1部分:钢制服务管聚氨酯隔热和聚乙烯外壳的双管组件

BS EN 17414-3-2020

District cooling pipes. Factory made flexible pipe systems-Non bonded system with plastic service pipes; requirements and test methods
区域冷却管工厂制造的软管系统

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统