IEC 60695-2-10:20 21 RLV包含官方IEC国际标准及其红线版本。Redline版本仅提供英文版本，为您提供了一种快速简单的方法来比较IEC官方标准与其以前版本之间的所有变化。 IEC 60695-2-10:20 21规定了辉光线设备和通用测试程序，以模拟热源（如发光元件或过载电阻器）在短时间内可能产生的热应力的影响，以便通过模拟技术评估火灾危险。本文件中描述的测试程序是用于小规模测试的通用测试程序，其中使用标准化电加热丝作为点火源。它是应用于最终产品和固体电绝缘材料或其他固体可燃材料的测试程序的常见部分。IEC 60695-2-11、IEC 60695-2-12和IEC 60695-2-13中给出了每个特定测试程序的详细描述。本基本安全性出版物侧重于安全性测试方法，主要供技术委员会根据IEC指南104和ISO/IEC指南51中规定的原则编写安全性出版物时使用。技术委员会的职责之一是在适用的情况下，在编制其出版物时利用基本安全出版物。本标准应与IEC 60695-2-11、IEC 60695-2-12和IEC 60695-2-13结合使用。这第三版取消并取代了2013年出版的第二版。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更:a)第3条增加了有关时间和持续时间的新术语和定义。 b)删除了以前的设备制造商和供应商附件A。 c)关于点火和燃烧观察的附件A（以前的附件B）已从信息性改为规范性。 d)添加了新的附录C，可视化时间和持续时间，并给出了样本行为以及如何评估它们的示例。

IEC 60695-2-10:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.

IEC 60695-2-10:2021 specifies the glow-wire apparatus and common test procedure to simulate the effects of thermal stresses which may be produced by heat sources such as glowing elements or overloaded resistors, for short periods, in order to assess the fire hazard by a simulation technique. The test procedure described in this document is a common test procedure intended for the small-scale tests in which a standardized electrically heated wire is used as a source of ignition. It is a common part of the test procedures applied to end products and to solid electrical insulating materials or other solid combustible materials. A detailed description of each particular test procedure is given in IEC 60695-2-11, IEC 60695-2-12 and IEC 60695-2-13. This basic safety publication focusing on safety test method(s) is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. This standard is to be used in conjunction with IEC 60695-2-11, IEC 60695-2-12, and IEC 60695-2-13. This third edition cancels and replaces the second edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) New terms and definitions with regards to times and durations have been added to Clause 3.
b) Previous Annex A of Equipment manufacturers and suppliers has been deleted.
c) Annex A (previous Annex B) for ignition and flaming observations has been changed from informative to normative.
d) New Annex C has been added, which visualizes times and durations, and gives examples for the behaviour of specimens, and how to evaluate them.