AS/NZS 3518:2013-压力应用用丙烯腈-丁二烯-苯乙烯（ABS）化合物、管道和配件-国家数字标准馆

现行 AS/NZS 3518:2013

到馆阅读

收藏跟踪

购买正版

Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications 压力应用用丙烯腈-丁二烯-苯乙烯（ABS）化合物、管道和配件

发布日期： 2013-02-19

规定了丙烯腈-丁二烯-苯乙烯（ABS）化合物（ABS 120、ABS 140、ABS 160和ABS 180）、管道和配件的性能要求，用于在地面和地下的压力下输送液体。包含管道尺寸系列1、系列2和系列3的尺寸。

Specifies the performance requirements for acrylonitrile butadiene styrene (ABS) compounds (ABS 120, ABS 140, ABS 160 and ABS 180), pipes and fittings for the conveyance of liquids under pressure in applications above and below ground. Covering dimensions for three ranges of pipe sizes, Series 1, Series 2 and Series 3.

分类信息

发布单位或类别：澳大利亚-澳大利亚/新西兰标准

关联关系

研制信息

相似标准/计划/法规

GB/T 20207.2-2006

丙烯腈－丁二烯－苯乙烯（ABS）压力管道系统第2部分：管件
Acrylonitrile-butadiene-styrene (ABS) pressure piping systems - Part 2: fittings

Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
丙烯腈-丁二烯-苯乙烯（ABS）塑料管和配件用溶剂水泥的标准规范

Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) — General specification for moulding and extrusion materials
丙烯腈/丁二烯/苯乙烯（ABS）和mdash的管道和配件；模塑和挤压材料通用规范

ISO 2507-3-1995

Thermoplastics pipes and fittings — Vicat softening temperature — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
热塑性塑料管道和配件——维卡软化温度第3部分:丙烯腈/丁二烯/苯乙烯（ABS）和丙烯腈/苯乙烯/丙烯酸酯（ASA）管道和管件的试验条件

ISO 8361-3-1991

Thermoplastics pipes and fittings — Water absorption — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings
热塑性塑料管道和配件——吸水性第3部分:丙烯腈/丁二烯/苯乙烯（ABS）管道和配件的试验条件

BS EN ISO 2507-3-2017

Thermoplastics pipes and fittings. Vicat softening temperature-Test conditions for acrylonitrile/butadiene/styrene (ABS) andacrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
热塑性塑料管和配件维卡软化温度

Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
管道和配件用刚性丙烯腈-丁二烯-苯乙烯（ABS）材料的标准分类系统和规范基础

DIN EN ISO 2507-3

Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
热塑性塑料管和配件维卡软化温度第3部分:丙烯腈/丁二烯/苯乙烯（ABS）和丙烯腈/苯乙烯/丙烯酸酯（ASA）管和配件的试验条件

Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
丙烯腈-丁二烯-苯乙烯（ABS）表40塑料排水、废水和通风管及配件的标准规范

ISO 8283-4-1992

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 4: Acrylonitrile/butadiene/styrene (ABS)
塑料管道和配件——建筑物内排放系统的插座和插口尺寸第4部分:丙烯腈/丁二烯/苯乙烯（ABS）

UNE-EN 1455-1-2000

PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM
建筑结构内土壤和废物排放（低温和高温）用塑料管道系统.丙烯腈-丁二烯-苯乙烯（ABS）.第1部分:管道、配件和系统的要求

BS ISO 727-1-2002

Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure-Metric series
由未增塑聚氯乙烯（PVC-U）、氯化聚氯乙烯（PVC-C）或丙烯腈/丁二烯/苯乙烯（ABS）制成的配件带普通套筒适用于压力管道

KS M ISO 727-1(2020 Confirm)

무가소화 폴리염화비닐(PVC－U), 염소화 폴리염화비닐(PVC－C) 및 아크릴로니트릴/부타디엔/스티렌(ABS) 압력관용 플레인 소켓 이음관－ 제1부：미터법
压力管道用带普通套筒的未增塑聚氯乙烯（PVC－U）、氯化聚氯乙烯（PVC－C）或丙烯腈/丁二烯/苯乙烯（ABS）制管件第1部分:米制系列

BS ISO 727-2-2005

Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure-Inch-based series
由未增塑聚氯乙烯（PVC-U）、氯化聚氯乙烯（PVC-C）或丙烯腈/丁二烯/苯乙烯（ABS）制成的配件带普通套筒适用于压力管道

Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 1: Metric series
压力管道用未增塑聚氯乙烯（PVC-U）、氯化聚氯乙烯（PVC-C）或丙烯腈/丁二烯/苯乙烯（ABS）制成的带普通套筒的管件第1部分:公制系列

Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 2: Inch-based series
压力管道用未增塑聚氯乙烯（PVC-U）、氯化聚氯乙烯（PVC-C）或丙烯腈/丁二烯/苯乙烯（ABS）制成的带普通套筒的管件第2部分:英制系列

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统