首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ISO 7804:1985
到馆阅读
收藏跟踪
购买正版
Commercial road vehicles — Side openings for truck power take-offs 商用道路车辆——卡车动力输出装置的侧开口
发布日期: 1985-10-31
确定卡车取力器侧开口的尺寸。这些规范适用于卡车和拖拉机变速箱上动力输出装置的所有一般安装,前提是变速箱尺寸允许。一些图说明了关注的形状和参考数量。
Establishes the dimensions of side openings for truck power take-offs. These specifications are applicable for all general installations of power take-offs on the transmission gearbox of trucks and tractors where the size of the transmission permits. Some figures illustrate shapes and reference quantities of concern.
分类信息
关联关系
研制信息
归口单位: ISO/TC 22/SC 40
相似标准/计划/法规
现行
DIN ISO 7804
Commercial road vehicles; side openings for truck power take-offs; identical with ISO 7804, edition 1985
商用道路车辆;卡车取力器的侧面开口;与ISO 7804 1985年版相同
1987-01-01
现行
BS +AU 215-2-1987
Power take offs (PTOs)-Specification for dimensions of side openings for commercial road vehicles
动力输出(PTO)
1987-01-30
现行
ISO 7707-1986
Commercial road vehicles — Connections for rear-mounted power take-offs (PTO)
商用道路车辆——后置动力输出装置(PTO)的连接
1986-10-16
现行
BS AU 215-1-1987
Power take offs (PTOs). Specification for dimensions for clearance envelope for commercial road vehicles
动力输出(PTO) 商用道路车辆净空包络线尺寸规范
1987-01-30
现行
ISO 7653-1985
Road vehicles — Commercial vehicles — Couplings between power take-offs (PTO) and ancillary driven units
道路车辆——商用车——动力输出(PTO)和辅助驱动装置之间的联轴器
1985-02-28
现行
KS R ISO 7653(2020 Confirm)
도로 차량 — 상용차 — 동력 인출 장치(PTO)와 보조 피동 장치 간의 커플링
道路车辆 - 商业车辆 - 动力起飞(pto)和辅助驱动单元之间的联轴器
2015-10-01
现行
DIN ISO 7706
Road vehicles; commercial vehicles; clearance envelope for power take-offs; identical with ISO 7706, edition 1985
道路车辆;商用车;动力输出的间隙包络线;与ISO 7706 1985年版相同
1987-10-01
现行
DIN ISO 7653
Road vehicles, commercial vehicles; couplings between power take-offs and ancillary driven units; identical with ISO 7653, edition 1985 (status as of 1986)
道路车辆、商用车辆;取力器和辅助驱动装置之间的联轴器;与1985年版ISO 7653相同(1986年的状态)
1986-12-01