干熄焦余热锅炉技术条件
Specification for waste heat boilers of coke dry quenching

2015-04-02

Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
焊接奥氏体钢锅炉、过热器、换热器和冷凝器管的标准规范

2024-05-01

锅炉、热交换器用管订货技术条件 第5部分：不锈钢
Purchase technical specification for boiler & heat exchanger tubes-Part 5: Stainless steel

2021-01-07

Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
无缝铁素体和奥氏体合金钢锅炉、过热器和换热器管的标准规范

2024-05-01

轧钢加热炉烟气余热回收利用技术规范
Technical specification of waste heat recovery and utiIization for exhaust gas of reheating furnace in steel rolling

2021-05-17

锅炉、热交换器用管订货技术条件 第6部分：奥氏体-铁素体型双相不锈钢
Purchase technical specification for boiler & heat exchanger tubes-Part 6: Austenite-ferrite duplex steel

2021-01-07

钢铁行业余热发电汽轮机冷端系统优化技术规范
Technical specification of optimizing the cool end system on steam turbine for waste heat power generation in steel industry

2021-03-05

锅炉、热交换器用管订货技术条件 第4部分：低温用低合金钢
Purchase technical specification for boiler & heat exchanger tubes-Part 4: Low alloy steel for low-temperature service

2021-01-07

Standard Specification for Electric-Resistance-Welded Carbon Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes with Textured Surface
表面有纹理的电阻焊接碳钢锅炉、过热器、热交换器和冷凝器管的标准规范

2021-11-01

锅炉、热交换器用管订货技术条件 第2部分：规定室温性能的非合金钢和合金钢
Purchase technical specification for boiler & heat exchanger tubes-Part 2: Non-alloy and alloy steel with room temperature properties

2021-01-07

Standard Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)
带纹理表面的焊接奥氏体、铁素体、马氏体和双相不锈钢锅炉、过热器、冷凝器和换热器管

2022-09-01

锅炉、热交换器用管订货技术条件 第3部分：规定高温性能的非合金钢和合金钢
Purchase technical specification for boiler & heat exchanger tubes/pipes-Part 3: Non-alloy and alloy steel with specified elevated temperature properties

2021-01-07

Трубы для котельного и теплообменного оборудования. Часть 2. Трубы стальные бесшовные для работы под давлением более 6,4 МПа и при температуре выше 400 °С. Технические условия
锅炉和热交换设备管 用于压力目的的无缝钢管多达6,4 MPa 温度超过400°C 规格

Трубы для котельного и теплообменного оборудования. Технические условия. Часть 1. Трубы стальные бесшовные для работы под давлением не более 6,4 МПа и при температуре не выше 400 °С
锅炉和热交换设备管 技术规格 第1部分:压力不大于6,4 MPa 温度不超过400℃的无缝钢管

2015-01-30