1.1 本规程可用于评估床罩和配件（可机洗或干洗、机织和针织）性能中重要的特定特性，包括床罩、被子、被子、枕头、防尘褶边和毯子，以下统称为床罩。 1.2 本规程不用于评估通过洗手翻新的被褥。 1.3 本规程不应被解释为床上用品的性能标准。 1.4 本规程不得用于评估板材。 1.5 买方和供应商之间可通过相互协议使用本惯例来制定采购规范。 1.6 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 本规程可用于评估可机洗或干洗被褥的相关性能特征。 4.2 待评估的特性和分配给这些区域的验收标准应由买方和供应商相互协商确定。 4.3 适当的测试方法和性能标准中讨论了特定特性的意义和用途。

1.1 This practice may be used to evaluate specific characteristics of importance in the performance of bedcoverings and accessories (machine washable or drycleanable, woven and knit) including bedspreads, comforters, quilts, pillowshams, dust ruffles, and blankets, hereinafter referred to collectively as bedcoverings. 1.2 This practice is not to be used to evaluate bedcoverings that are refurbished by handwashing. 1.3 This practice shall not be construed to be a standard of performance for bedcoverings. 1.4 This practice shall not be used to evaluate sheets. 1.5 This practice may be used by mutual agreement between purchaser and supplier to set purchasing specifications. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 This practice may be used to evaluate pertinent performance characteristics of machine washable or drycleanable bedcoverings. 4.2 The characteristics to be evaluated and the acceptance criteria assigned to these areas shall be set by mutual agreement between purchaser and supplier. 4.3 The significance and use of specific properties are discussed in the appropriate test methods and performance standards.