IEC 60695-11-10:20 13规定了小规模实验室测试程序，旨在比较电工产品中使用的不同材料在垂直或水平方向的测试棒试样暴露于标称热功率为50 W的小火焰点火源时的燃烧行为。这些测试方法确定材料的线性燃烧速率或自熄特性。这些测试方法适用于根据ISO 845测定的表观密度大于250kg/m3的固体和多孔材料。描述了两种测试方法。方法A是水平燃烧试验，旨在确定材料在特定试验条件下的线性燃烧速率。方法B是垂直燃烧试验，旨在确定材料是否自-在特定试验条件下熄灭。第二版取消并取代了2003年发布的IEC 60695-11-10的合并版本，构成了技术修订。与第一版相比的主要变化如下: -为了使IEC 60695-11-10与IEC 60695-11-20保持一致，对整个文件进行了编辑变更， -第7条增加了有关试样尺寸的详细信息， -增加了新的子条款9.1.4棉垫的调节， -增加了新的子条款9.2.4“烧到固定夹”的评价， -增加了带有数据表示例的新附件C， -更新了参考书目并增加了参考文献。根据IEC指南104和ISO/IEC指南51，它具有基本安全出版物的地位。本国际标准应与IEC 60695-11-4结合使用。 关键词:试验火焰，火灾危险，火灾试验

IEC 60695-11-10:2013 specifies small-scale laboratory test procedures intended to compare the burning behaviour of different materials used in electrotechnical products when vertically or horizontally oriented test bar specimens are exposed to a small flame ignition source with a nominal thermal power of 50 W. These test methods determine either the linear burning rate or the self-extinguishing properties of materials. These test methods are applicable to solid and cellular materials that have an apparent density of more than 250 kg/m3, determined in accordance with ISO 845. Two test methods are described. Method A is a horizontal burning test and is intended to determine the linear burning rate of materials under specific test conditions. Method B is a vertical burning test and is intended to determine whether materials self-extinguish under specific test conditions. This second edition cancels and replaces the consolidated version of IEC 60695-11-10 published in 2003 and constitutes a technical revision. The main changes with respect to the first edition are listed below:
- Editorial changes have been made throughout the document for the purpose of aligning IEC 60695-11-10 with IEC 60695-11-20,
- Details on test specimen dimensions have been added to Clause 7,
- New Sublause 9.1.4 Conditioning of the cotton pad has been added,
- New Subclause 9.2.4 Evaluation of "burned to the holding clamp" has been added,
- New Annex C with examples of datasheets has been added,
- The Bibliography has been updated and references added. It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51. This International Standard is to be used in conjunction with IEC 60695-11-4. Key words: Test flames, Fire hazard, Fire test