1.1 本规范涵盖了导电材料（主要是金属）的清洁、涂层或表面改性或其组合的要求。 1.2 本规范涵盖通过电解等离子体工艺（EPP）处理或加工的任何导电材料，包括:指定为长产品的产品，包括电线和细电线；平轧材料；紧固件；连接器；螺栓；组件；结构材料；硬件项目；和医疗用品。 1.3 根据本工艺生产的产品应明确规定使用EPP工艺加工的特定产品的要求。 1.4 本规范适用于英寸-磅或国际单位制的订单。 1.5 以国际单位制或英寸-磅单位表示的数值应单独视为标准值。每个系统中规定的值不一定是精确的等价物； 因此，为确保符合本标准，每个系统应独立使用，且两个系统的值不得组合。 1.6 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This specification covers the requirements for cleaning, coating, or surface modification, or combinations thereof, of conductive materials, primarily metals. 1.2 This specification covers any conductive material treated or processed by the electrolytic plasma process (EPP) including: products designated as long products, including wire and fine wire; flat-rolled materials; fasteners; connectors; bolts; assemblies; structural materials; hardware items; and medical items. 1.3 Products created under this process shall specifically specify requirements for the specific product being processed using the EPP process. 1.4 This specification is applicable for orders in either inch-pound or SI units. 1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.