BS EN ISO 15883-6:2015规定了在以下情况下使用的清洗消毒器（WD）的特殊要求: 必要的消毒保证水平可以通过清洁和热消毒来实现 （A0不少于60），且不要求保留关键流程的独立自动记录。信息技术 旨在与ISO 15883-1结合使用，ISO 15883-1给出了WDs的一般要求。这种特殊类型的WD可用于的产品范围仅限于设备和设备 哪些是非- 侵入性和非关键性（即不穿透皮肤或接触粘膜表面）。注:热消毒可通过用热水冲洗负载物、暴露于蒸汽或以下方法的组合来实现 两个。交叉引用:ISO 15883-1:2006ISO/TS 15883-5ISO 15883-2ISO 15883-3ISO 15883-4IEC 61010-2-04093/42/EECAll购买本文件时提供的当前修订包括在内。

BS EN ISO 15883-6:2015 specifies particular requirements for washer-disinfectors (WDs) intended for use when the level of assurance of disinfection that is necessary can be achieved by cleaning and thermal disinfection (A0not less than 60) and does not require an independent automated record of critical processes to be kept. It is intended to be used in conjunction with ISO 15883-1, which gives general requirements for WDs.The range of products on which WDs of this particular type can be used is restricted to devices and equipment which are non-invasive and non-critical (i.e. not penetrating skin or contacting mucosal surfaces).NOTE Thermal disinfection can be achieved by rinsing the load with hot water, exposure to steam or combination of the two.Cross References:ISO 15883-1:2006ISO/TS 15883-5ISO 15883-2ISO 15883-3ISO 15883-4IEC 61010-2-04093/42/EECAll current amendments available at time of purchase are included with the purchase of this document.