1.1 本试验方法包括苯凝固点的测定。 1.2 以下适用于确定使用该测试方法的测试结果是否符合适用规范的目的，应根据实践中的舍入方法对结果进行舍入 E29 . 1.3 以国际单位制表示的数值应视为标准。本标准不包括其他计量单位。 1.4 警告 汞已被许多监管机构指定为一种可能导致严重医疗问题的危险物质。汞或其蒸汽已被证明对健康有害，对材料具有腐蚀性。处理汞和含汞产品时应小心谨慎。有关更多信息，请参阅适用的产品安全数据表（SDS）。用户应意识到，法律可能禁止向您所在的州或国家销售汞和/或含汞产品。 1.5 本标准并不旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 有关具体的危险说明，请参阅第节 7. . 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ====意义和用途====== 5.1 该试验方法可用作测定苯纯度的标准。凝固点越接近纯苯的凝固点，样品就越纯净。

1.1 This test method covers the determination of the solidification point of benzene. 1.2 The following applies for the purposes of determining the conformance of the test results using this test method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29 . 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 Warning— Mercury has been designated by many regulatory agencies as a hazardous substance that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury containing products. See the applicable product Safety Data Sheet (SDS) for additional information. Users should be aware that selling mercury and/or mercury containing products into your state or country may be prohibited by law. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 7 . 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 This test method may be used as a criteria for determining the purity of benzene. The closer the solidification point reaches that of pure benzene, the purer the sample.