现行

BS EN ISO 9080-2012

Plastics piping and ducting systems. Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
塑料管道系统 用外推法测定管形热塑性材料的长期静水压强度

2012-10-31

现行

ISO 9080-2012

Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
塑料管道系统——用外推法测定管形热塑性材料的长期静水压强度

2012-10-11

现行

GB/T 18252-2020

塑料管道系统 用外推法确定热塑性塑料材料以管材形式的长期静液压强度
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation

2020-11-19

现行

ISO 17456-2006

Plastics piping systems — Multilayer pipes — Determination of long-term strength
塑料管道系统——多层管道——长期强度的测定

2006-10-03

现行

GB/T 40937-2021

塑料管道系统 塑料复合管材和管件长期强度的测定方法
Plastic piping systems—Determination of long-term strength for plastic composite pipes and fittings

2021-11-26

现行

UNE-EN ISO 9080-2003

Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003)
塑料管道和导管系统.用外推法测定管形热塑性材料的长期静水压强度（ISO 9080-2003）

2003-09-19

现行

AS/NZS 1462.29-2019

Methods of test for plastic pipes and fittings, Method 29: Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
塑料管道和配件的试验方法 方法29:塑料管道和管道系统.用外推法测定管形热塑性材料的长期静水压强度

2019-12-15

现行

BS 10/30180079 DC

BS EN ISO 9080. Plastics piping and ducting systems. Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
BS EN ISO 9080 塑料管道系统 用外推法测定管形热塑性材料的长期静水压强度

2010-02-24

现行

BS EN 1447-2009+A1-2010

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of long-term resistance to internal pressure
塑料管道系统 玻璃纤维增强热固性塑料（GRP）管 长期抗内压性的测定

2011-01-31

现行

UNE-EN 1447-2009+A1-2011

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
塑料管道系统.玻璃纤维增强热固性塑料（GRP）管.长期耐内压性的测定

2011-03-16

现行

JIS K 7039-1998

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and calculation of the long-term ultimate relative ring deflection, both under wet conditions
塑料管道系统玻璃纤维增强热固性塑料（GRP）管长期极限弯曲应变的测定和潮湿条件下长期极限相对环挠度的计算

1998-01-01

现行

BS EN 1227-1998

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate relative ring deflection under wet conditions
塑料管道系统 玻璃纤维增强热固性塑料（GRP）管 潮湿条件下长期极限相对环挠度的测定

1998-05-15

现行

UNE-EN 1227-1998

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE LONG-TERM ULTIMATE RELATIVE RING DEFLECTION UNDER WET CONDITIONS.
塑料管道系统 玻璃纤维增强热固性塑料（GRP）管 潮湿条件下长期极限相对环挠度的测定

1998-06-25

现行

BS EN 1225-1996

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness
塑料管道系统 玻璃纤维增强热固性塑料（GRP）管 潮湿条件下蠕变系数的确定和长期比环刚度的计算

1996-12-15

现行

UNE-EN 1225-1996

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE CREEP FACTOR UNDER WET CONDITIONS AND CALCULATION OF THE LONG-TERM SPECIFIC RING STIFFNESS.
塑料管道系统 玻璃纤维增强热固性塑料（GRP）管 潮湿条件下蠕变系数的确定和长期比环刚度的计算

1996-11-24

现行

JIS K 7035-1998

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness
塑料管道系统玻璃纤维增强热固性塑料（GRP）管潮湿条件下蠕变系数的测定和长期比环刚度的计算

1998-01-01

现行

BS EN 12107-1998

Plastics piping systems. Injection-moulded thermoplastics fittings, valves and ancillary equipment. Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
塑料管道系统 注塑热塑性塑料配件、阀门和辅助设备 管道部件注射成型用热塑性材料长期静水压强度的测定

1998-03-15

现行

UNE-EN 12107-1998

PLASTICS PIPING SYSTEMS. INJECTION-MOULDED THERMOPLASTICS FITTINGS, VALVES AND ANCILLARY EQUIPMENT. DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS FOR INJECTION MOULDING OF PIPING COMPONENTS.
塑料管道系统 注塑热塑性塑料配件、阀门和辅助设备 管道部件注射成型用热塑性材料长期静水压强度的测定

1998-05-07

现行

DIN EN 17151

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of long-term compression strength of boxes
非饮用水的无压地下输送和储存用塑料管道系统.盒子长期抗压强度测定的试验方法

2019-11-01

现行

BS EN 17151-2019

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Test method for determination of long-term compression strength of boxes
非饮用水无压地下输送和储存用塑料管道系统 箱子长期抗压强度测定的试验方法

2020-02-17