1.范围1。1本标准涵盖了通信线路和电力线路（包括配电和输电线路）施工中所用硬件的一般要求。1.2附录J中数字列出的单个硬件项目的详细要求包含在单独的项目标准中，例如C83。46、电缆架；C83。49，应变链；C83。75，顶针拉杆。注:（1）附录A、B和C提供了有关线路硬件取样和检查的信息。（2） 附录D提供了公制和英制标准的可比标准和财产类别的交叉参考。在公制紧固件随时可用之前，制造商和买方应参考并接受该标准。 （3） 附录E和F提供了输电线路五金配件电晕试验的信息。（4） 附录G提供了输电线路配件的设计原理。（5） 附录H提供了有关受拉螺纹项目的信息。（6） 附录I提供了用于钢制品过程控制的硬度测量信息。（7） 有关架空线路的结构等级和强度要求的信息，请参见CSA标准CAN/CSA-C22。3号1。

1. Scope1.1This Standard covers the general requirements for hardware used in the construction of communication lines and power lines including distribution and transmission lines.1.2Detailed requirements for individual items of hardware as numerically listed in Appendix J are covered in separate Item Standards, eg, C83.46, Cable Rack; C83.49, Strain Link; C83.75, Thimble Guy Rod. Notes: (1) Appendices A, B, and C provide information on sampling and inspection of line hardware. (2) Appendix D provides a cross reference of comparable Standards and property classes for metric and imperial fasten ers. It is intended to be referred to and accepted by the manufacturer and purchaser until such time as metric fasteners become readily available. (3) Appendices E and F provide information for the corona testing of transmission line hardware fittings. (4) Appendix G provides design rationale for the transmission line fittings. (5) Appendix H provides information on threaded items in tension. (6) Appendix I provides information on hardness measurements for process control of steel items. (7) For information on grades of construction and strength re quirements for overhead lines, see CSA Standard CAN/CSA-C22.3 No. 1.