Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders (ISO 9809-3:2010)
气瓶.可重复充装的无缝钢气瓶.设计 结构和试验.第3部分:正火钢瓶（ISO 9809-3-2010）

2010-10-20

가스 실린더 － 재충전용 이음매 없는 강재 가스 실린더 － 설계, 제조 및 시험 － 제3부: 노멀라이징된 강재 실린더
气瓶－可重复充装的无缝钢气瓶－设计、制造和试验－第3部分:正火钢瓶

2016-12-21

가스 실린더 － 재충전용 이음매 없는 강재 가스 실린더 － 설계, 제조 및 시험 － 제3부: 노멀라이징된 강재 실린더
气瓶可再充装无缝钢气瓶设计、建造和试验第3部分:正火钢瓶

2016-12-21

Gas cylinders — Design, construction and testing of refillable seamless steel gas cylinders and tubes — Part 3: Normalized steel cylinders and tubes
气瓶 - 可再填充的设计 建造和测试 无缝钢气瓶和管 - 第3部分:标准化钢瓶和管

2019-08-22

가스 실린더 — 재충전용 이음매 없는 강재 가스 실린더와 튜브의 설계, 제조 및 시험 — 제3부: 노멀라이징된 강재 실린더와 튜브
气瓶.可再充装无缝钢气瓶和管的设计、结构和试验.第3部分:正火钢气瓶和钢管

2022-12-30

ISO 9809-1. Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing. Part 1. Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
ISO 9809-1 气瓶 可重复充装的无缝钢气瓶 设计、施工和测试 第一部分 抗拉强度小于1100 MPa的调质钢瓶

2006-09-21

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa (ISO 9809-1:2010)
气瓶.可再填充无缝钢气瓶.设计 施工和试验.第1部分:抗拉强度小于1100 MPa的淬火和回火钢瓶（ISO 9809-1-2010）

2010-10-13

ISO 9809-2. Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing. Part 2. Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa
ISO 9809-2 气瓶 可重复充装的无缝钢气瓶 设计、施工和测试 第二部分 抗拉强度大于或等于1100 MPa的淬火和回火钢瓶

2006-09-21

Gas cylinders - Refillable seamless steel gas cylinders - Acoustic emission testing (AT) for periodic inspection (ISO 16148:2006)
气瓶.可再填充无缝钢气瓶.周期检验用声发射试验（AT）（ISO 16148-2006）

2007-06-20

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2010)
气瓶.可再填充无缝钢气瓶.设计 结构和试验.第2部分:抗拉强度大于或等于1100 MPa的淬火和回火钢瓶（ISO 9809-2-2010）

2010-10-20

Gas cylinders — Refillable seamless steel — Performance tests — Part 3: Fracture performance tests — Cyclical burst tests
气瓶——可再填充无缝钢——性能测试SPART 3:断裂性能测试——周期性爆破试验

2002-12-11

재충전용 이음매 없는 강제 가스 용기의성능 시험－제3부：파괴 성능 시험－반복 파열 시험
气瓶可再充装无缝钢性能试验第3部分:断裂性能试验循环爆破试验

2015-12-28

TRANSPORTABLE GAS CYLINDERS. SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0,5 LITRE UP TO AND INCLUDING 150 LITRES. PART 3: CYLINDERS MADE OF SEAMLESS STAINLESS STEEL WITH AND Rm VALUE OF LESS THAN 1 1000 MPa.
可运输的气瓶 水容量为0.5升至150升（含150升）的可再充装可运输无缝钢气瓶的设计和制造规范 第3部分:Rm值小于1 1000 MPa的无缝不锈钢气瓶

2000-09-21

가스 실린더 — 내용적 150 L 이상 3 000 L 이하의 재충전용 이음매 없는 강관 — 설계, 제작 및 시험
气瓶.水容量在150L和3000L之间的可再填充无缝钢管.设计 施工和试验

2017-08-21

가스 실린더 — 내용적 150 L 이상 3 000 L 이하의 재충전용 이음매 없는 강관 — 설계, 제작 및 시험
储气罐 - 容量在150升至3 000升之间的可再充装无缝钢管 - 设计 建造和测试

2017-08-21

GAS CYLINDERS. REFILLABLE SEAMLESS STEEL TUBES FOR COMPRESSED GAS TRANSPORT, OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN CONSTRUCTION AND TESTING (ISO 11120:1999).
气瓶 水容量在150L和3000L之间的压缩气体运输用可再填充无缝钢管.设计结构和试验（ISO 11120-1999）

1999-11-18

Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015)
气瓶.水容量在150L和3000L之间的可再填充无缝钢管.设计 施工和试验（ISO 11120-2015）；德文版EN ISO 11120:2015

2015-05-01

Gas cylinders. Periodic inspection and testing, in situ (without dismantling) of refillable seamless steel tubes of water capacity between 150 l and 3 000 l, used for compressed gases
气瓶 用于压缩气体的水容量在150 l和3000 l之间的可再填充无缝钢管的现场定期检查和测试（不拆卸）

2016-06-30

Gas cylinders - Periodic inspection and testing, in situ (without dismantling) of refillable seamless steel tubes of water capacity between 150 l and 3 000 l, used for compressed gases
气瓶.压缩气体用水容量在150L和3000L之间的可再填充无缝钢管的现场（不拆卸）定期检验和试验

2016-09-01

Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0.5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel with an R<(Index)m> value of less than 1100 Mpa; English version of DIN EN 1964-3
可运输气瓶.容量为0.5升至150升（含150升）的可再充装可运输无缝钢气瓶的设计和制造规范.第3部分:最大R<（指数）m>值小于1100 MPa的不锈钢气瓶；德式ve

2000-04-01