温室气体 二氧化碳、甲烷测量方法

2024-04-23

特定二酸化炭素ガスに含まれる二酸化炭素の濃度の測定の方法を定める省令
特定二氧化碳气体中包含的二氧化碳浓度的测量方法的省令

温室气体（二氧化碳和甲烷）走航监测技术规范

2024-08-15

二氧化碳气体保护半自动焊工艺规范

1997-03-10

温室气体 二氧化碳测量 离轴积分腔输出光谱法
Greenhouse gas—Carbon dioxide measurement—Off-axis integrated cavity output spectroscopy method

2017-09-07

温室气体 二氧化碳和甲烷观测规范 离轴积分腔输出光谱法
Greenhouse gases-Observation specification for carbon dioxide and methane—Off-axis integrated cavity output spectroscopy method

2018-06-26

猪粪资源化利用替代化肥非二氧化碳温室气体减排量核算指南

2020-10-30

气体中甲烷、氧化亚氮和二氧化碳浓度测定 气相色谱法

2021-03-05

低压低浓度二氧化碳捕集技术工艺包编制规范

2022-10-26

汽油乘用车导航出行二氧化碳减排量评估技术规范

2024-08-01

An Evaluation of the Effect of Co2 Based Demand Controlled Ventilation Strategies on Energy Use and Occupant Source Contamination Concentration
基于二氧化碳的需求控制通风策略对能源使用和乘客源污染浓度的影响评估

基于项目的二氧化碳减排量评估技术规范 高炉大比例球团冶炼

2023-12-20

Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide
可运输气瓶 - 压缩 液化和溶解气体高达0.5升的可再填充可运输无缝标准化碳锰钢气罐的设计和建造规范 二氧化碳最高可达1升

2002-10-16

Standard Welding Procedure Specification (Swps) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuting Transfer Mode) followed by Argon Plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, ER70
1/8至1-1/2英寸厚ER70碳钢（M-1/P-1/S-1 第1组和第2组）氩加25%二氧化碳保护气体保护金属弧焊（短路过渡模式）和氩加25%二氧化碳保护药芯焊丝电弧焊的标准焊接工艺规范（Swps）

2006-01-01

Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide
可运输的气瓶 水容量不超过0.5升（用于压缩、液化和溶解气体）和不超过1升（用于二氧化碳）的可再填充可运输无缝正火碳锰钢气瓶的设计和制造规范

2002-10-22

Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0.5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide
可运输气瓶.可重复充装的可运输无缝正火碳锰钢气瓶的设计和制造规范 压缩、液化和溶解气体的水容量不超过0.5升 二氧化碳的水容量不超过1升；德语版EN 132

2003-01-01

2010/345/: Commission Decision of 8 June 2010 amending Decision 2007/589/EC as regards the inclusion of monitoring and reporting guidelines for greenhouse gas emissions from the capture, transport and geological storage of carbon dioxide (notified under document C(2010) 3310) (Text with EEA relevance )
2010/345/:委员会2010年6月8日的决定 修订了第2007/589/EC号决定 其中包括二氧化碳捕获、运输和地质储存过程中温室气体排放的监测和报告指南（根据C（2010）3310号文件通知）（与欧洲经济区相关的文本）

2010-06-08

Standard Welding Procedure Specification (Swps) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuting Transfer Mode) followed by Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1) Groups 1 and 2, 1/8 through 1-1/2 inch
碳钢（M-1/P-1/S-1）组1和2、1/8至1-1/2英寸的氩加25%二氧化碳气体保护金属极弧焊（短路过渡模式）和氩加2%氧气保护气体保护金属极弧焊（喷射过渡模式）的标准焊接工艺规范（Swps）

2006-01-01

2010/670/EU: Commission Decision of 3 November 2010 laying down criteria and measures for the financing of commercial demonstration projects that aim at the environmentally safe capture and geological storage of CO 2 as well as demonstration projects of innovative renewable energy technologies under the scheme for greenhouse gas emission allowance trading within the Community established by Directive 2003/87/EC of the European Parliament and of t
2010/670/EU:2010年11月3日的委员会决定 规定了商业示范项目的融资标准和措施 这些项目旨在环境安全地捕获和地质储存二氧化碳 以及创新可再生能源技术的示范项目 这些项目是根据欧盟建立的共同体内温室气体排放配额交易计划进行的欧洲议会和t

2010-11-03