首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS EN ISO 19901-4:2016
到馆阅读
收藏跟踪
购买正版
Petroleum and natural gas industries. Specific requirements for offshore structures-Geotechnical and foundation design considerations 石油和天然气工业 海洋结构物的具体要求
发布日期: 2016-08-31
B.EN ISO 1990 01-4:2016包含了地球科学和基础工程方面的规定。 适用于广泛的海洋结构物,而不是特定的结构类型。 这些方面包括:场地和土壤特征;危险识别;由海床支撑的浅基础的设计和安装;桩基的设计和安装;辅助结构的土壤-结构相互作用,例如海底生产系统、立管和 流线(A.10中给出的指南);浮式结构物固定系统用锚的设计(A.11中给出的指南)。海洋土壤调查的特殊要求详见ISO 19901-8。适用于近海和陆上的土力学和基础工程方面 结构没有得到解决。ISO 19901本部分的用户应熟悉此类 方面。ISO 19901-4概述了主要为浅基础设计开发的方法 嵌入长度(L)与直径(D)之比L/D<1(第7条)和相对长且灵活的桩 L/D>10的基础(第8条)。ISO 19901的本部分不适用于中间基础 1
BS EN ISO 19901-4:2016 contains provisions for those aspects of geoscience and foundation engineering that are applicable to a broad range of offshore structures, rather than to a particular structure type. Such aspects are:site and soil characterization;identification of hazards;design and installation of shallow foundations supported by the seabed;design and installation of pile foundations;soil-structure interaction for auxiliary structures, e.g. subsea production systems, risers and flowlines (guidance given in A.10);design of anchors for the stationkeeping systems of floating structures (guidance given in A.11).Particular requirements for marine soil investigations are detailed in ISO 19901-8.Aspects of soil mechanics and foundation engineering that apply equally to offshore and onshore structures are not addressed. The user of this part of ISO 19901 is expected to be familiar with such aspects.ISO 19901-4 outlines methods developed primarily for the design of shallow foundations with an embedded length (L) to diameter (D) ratio L/D < 1 (Clause 7) and relatively long and flexible pile foundations with L/D > 10 (Clause 8). This part of ISO 19901 does not apply to intermediate foundations with 1 < L/D < 10. Such intermediate foundations, often known as 'caisson foundations', comprise either shallow foundations with skirts penetrating deeper into the seabed than the width of the foundation, or shorter, more rigid and larger diameter piles than those traditionally used for founding offshore structures. The design of such foundations can require specific analysis methods; it is important that any extrapolation from the design methods described in this part of ISO 19901 to intermediate foundations be treated with care and assessed by a geotechnical specialist.Cross References:ISO 19900ISO 19901-1ISO 19901-2ISO 19901-3ISO 19901-5ISO 19901-6ISO 19901-7:2013ISO 19901-8ISO 19902ISO 19903ISO 19905-1ISO 19906ISO/TR 19905-2ISO 2394API RP 2AAPI RP 2GEOAPI RP 2SKAPI RP 2TNEN 6743All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
BS EN ISO 19901-5-2021
Petroleum and natural gas industries. Specific requirements for offshore structures-Weight management
石油和天然气工业 海洋结构物的具体要求
2022-03-08
现行
BS EN ISO 19901-6-2009
Petroleum and natural gas industries. Specific requirements for offshore structures-Marine operations
石油和天然气工业 海洋结构物的具体要求
2012-08-31
现行
BS EN ISO 19901-3-2014
Petroleum and natural gas industries. Specific requirements for offshore structures-Topsides structure
石油和天然气工业 海洋结构物的具体要求
2014-12-31
现行
BS EN ISO 19900-2019
Petroleum and natural gas industries. General requirements for offshore structures
石油和天然气工业 海洋结构物的一般要求
2019-07-23
现行
KS B ISO 19900(2019 Confirm)
석유 및 천연가스 산업 — 해양구조물의 일반 요구사항
石油和天然气工业 - 海洋结构的一般要求
2014-12-28
现行
AS ISO 19900-2022
Petroleum and natural gas industries - General requirements for offshore structures
石油和天然气工业.海上结构物的一般要求
2022-05-13
现行
ISO 19900-2019
Petroleum and natural gas industries — General requirements for offshore structures
石油和天然气工业 - 海洋结构的一般要求
2019-06-14
现行
GOST R 54802-2011
Нефтяная и газовая промышленность. Компрессоры поршневые газовые агрегатированные. Технические требования
石油和天然气工业 封装往复式气体压缩机 技术要求
现行
BS EN ISO 19901-9-2019
Petroleum and natural gas industries. Specific requirements for offshore structures-Structural integrity management
石油和天然气工业 海洋结构物的具体要求
2019-09-20
现行
BS ISO 13879-1999
Petroleum and natural gas industries. Content and drafting of functional specifications
石油和天然气工业 功能规范的内容和起草
2000-04-15
现行
BS ISO 13880-1999
Petroleum and natural gas industries. Content and drafting of a technical specification
石油和天然气工业 技术规范的内容和起草
2000-01-15
现行
KS B ISO 13879(2019 Confirm)
석유 및 천연 가스 산업-기능 명세서의 내용 및 작성법
石油和天然气工业功能规范的内容和起草
2004-11-26
现行
KS B ISO 13880(2019 Confirm)
석유 및 천연 가스 산업-기술 명세서의 내용 및 작성법
石油和天然气工业技术规范的内容和起草
2004-11-26
现行
KS B ISO 13879(2024 Confirm)
석유 및 천연 가스 산업-기능 명세서의 내용 및 작성방법
石油和天然气工业.功能规范的内容和起草
2004-11-26
现行
KS B ISO 13880(2024 Confirm)
석유 및 천연 가스 산업-기술 명세서의 내용 및 작성방법
石油和天然气工业技术规范的内容和起草
2004-11-26
现行
GB/T 24258-2009
石油天然气工业 技术规范的内容与编写
Petroleum and natural gas industries - Content and drafting of a technical specification
2009-07-10
现行
GOST 32696-2014
Трубы стальные бурильные для нефтяной и газовой промышленности. Технические условия
石油和天然气工业钢钻杆 规格
2014-06-25
现行
GB/T 24257-2009
石油天然气工业 功能规范的内容与编写
Petroleum and natural gas industries - Content and drafting of a functional specification
2009-07-10
现行
ISO 13880-1999
Petroleum and natural gas industries — Content and drafting of a technical specification
石油和天然气工业——技术规范的内容和起草
1999-10-21
现行
ISO 13879-1999
Petroleum and natural gas industries — Content and drafting of a functional specification
石油和天然气工业——功能规范的内容和起草
1999-10-21