电动汽车用高压大电流线束和连接器技术要求
Technical specifications of high duty cables and connectors for electric vehicles

2018-12-28

质量分级及“领跑者”评价要求 电动汽车高压连接器

2023-06-30

电动汽车高压屏蔽线缆及连接器表面转移阻抗测试方法

2021-11-26

电动汽车高压配电盒技术条件及测试方法

2023-09-06

电动汽车更换用电池箱连接器通用技术要求
General requirements for swapping battery pack connector of electric vehicle

2016-08-29

电动汽车用增程器技术条件
Specifications of range extender for electrical vehicles

2017-04-12

Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles-Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system
插头、插座、车辆连接器和车辆插孔 电动汽车的传导充电

2020-03-31

电动汽车用充放电式电机控制器技术条件
Specifications of charge-discharge motor controller for electric vehicles

2017-04-21

电动汽车用屏蔽密封单芯快锁金属外壳功率电连接器

2018-12-05

Outline for Connectors and Service Plugs for Use with On-Board Electrical Vehicle (EV) Charging Systems (Outline, 2/27/2015)
车载电动汽车（EV）充电系统用连接器和维修插头的大纲（大纲 2/27/2015）

2015-02-27

Вилки, штепсельные розетки, соединители и вводы для транспортных средств. Кондуктивная зарядка для электромобилей. Часть 1. Общие требования
插头 插座 连接器和套管的车辆 传导充电的电动汽车 第1部分:通用要求

汽车与挂车单管路气制动管连接器技术条件
Technical requirements for trailer single-line airbrake lin connection

1994-10-17

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where protection relies on electrical separation
插头、插座、车辆连接器和车辆插孔.电动汽车的传导充电.第6部分:用于直流电动汽车供电设备的直流插脚和接触管车辆耦合器的尺寸兼容性要求 其中保护依赖于电气隔离

2022-04-22

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where protection relies on electrical separation
插头、插座、车辆连接器和车辆插孔.电动汽车的传导充电.第6部分:用于直流电动汽车供电设备的直流插脚和接触管车辆耦合器的尺寸兼容性要求 其中保护依赖于电气隔离

2022-06-03

Plugs,socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system
插头、插座、车辆连接器和车辆插孔.电动汽车的传导充电.第3-1部分:与热管理系统一起使用的直流充电用车辆连接器、车辆插孔和电缆组件

2020-03-26

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements; German version EN 62196-1:2012/A11:2013
插头、插座、车辆连接器和车辆插孔.电动汽车的传导充电.第1部分:一般要求；德文版EN 62196-1:2012/A11:2013

2013-09-01

换电式纯电动重型载货汽车及共享换电站建设通用技术要求第4部分：换电连接器通用技术要求

2023-12-26

Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements; German version EN 62196-1:2012/FprAA:2012
起草文件——插头、插座、车辆连接器和车辆插孔——电动汽车的传导充电——第1部分:一般要求；德文版EN 62196-1:2012/FprAA:2012

2012-07-01

Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements; German version EN 62196-1:2012/FprAB:2013
起草文件——插头、插座、车辆连接器和车辆插孔——电动汽车的传导充电——第1部分:一般要求；德文版EN 62196-1:2012/FprAB:2013

2014-05-01

Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements (IEC 23H/389A/CD:2017); Text in German and English
文件草案——插头、插座、车辆连接器和车辆插孔——电动汽车的传导充电——第1部分:一般要求（IEC 23H/389A/CD:2017）；德语和英语文本

2018-06-01