BS EN 13108-9:2016规定了道路用超薄沥青层（AUTL）的要求 道路、机场和其他交通区域。AUTL是铺设在粘结层上的热拌沥青路面层，标称厚度为 10毫米和20毫米，具有适合预期用途的特性。粘合方法是一种基本的方法 部分过程和最终产品是粘结系统和沥青混合料的组合 混合物AUTL的粘合方法不在本欧洲标准的范围内。混合物 基于现场回收利用的沥青乳液和沥青材料不包括在本条款中 标准本欧洲标准包括选择成分材料的要求。它是 设计为结合EN 13108-20和EN 13108-21阅读。交叉引用:EN 1097-6:2013EN 1426EN 1427EN 12591EN 12697EN 13043EN 13108-4:2016EN 13108-8EN 13108-20:2016EN 13108-21EN 13501-1:2007+A1:2009EN 13924-2EN 14023EN ISO 11925-2ISO 11925-2EN 13924-1购买本文件时可提供的所有当前修订。

BS EN 13108-9:2016 specifies requirements of Asphalt for Ultra-Thin-Layers (AUTL) for use on roads, airfields and other trafficked areas.AUTL is a hot mix asphalt road surface course laid on a bonding layer, at a nominal thickness between 10 mm and 20 mm with properties suitable for the intended use. The method of bonding is an essential part of the process and the final product is a combination of the bonding system and the bituminous mixture. The method of bonding of AUTL is out of the scope of this European Standard. Mixtures utilizing bitumen emulsion and bituminous materials based on in situ recycling are not covered by this standard.This European Standard includes requirements for the selection of the constituent materials. It is designed to be read in conjunction with EN 13108-20 and EN 13108-21.Cross References:EN 1097-6:2013EN 1426EN 1427EN 12591EN 12697EN 13043EN 13108-4:2016EN 13108-8EN 13108-20:2016EN 13108-21EN 13501-1:2007+A1:2009EN 13924-2EN 14023EN ISO 11925-2ISO 11925-2EN 13924-1All current amendments available at time of purchase are included with the purchase of this document.