Part 1: Methods of Analysis of Bolted Flanged Connections - A review
第1部分:螺栓法兰连接的分析方法——综述

Flanges and their joints - Bolting - Part 1: Selection of bolting
法兰及其接头.螺栓连接.第1部分:螺栓连接的选择；德文版EN 1515-1:1999

2000-01-01

FLANGES AND THEIR JOINTS - BOLTING - PART 1: SELECTION OF BOLTING
法兰及其接头.螺栓连接.第1部分:螺栓连接的选择

2000-04-17

Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method
法兰及其连接件.带垫圈的圆形法兰连接件的设计规则.第1部分:计算方法

2009-11-25

Hydraulic Flange Tube, Pipe, and Hose Connections Four-Screw Flange Connection - Part 1: 3.5 to 35 MPa (Code 61)
液压法兰管、管和软管连接-四螺钉法兰连接-第1部分:3.5-35MPa（代码61）

2023-03-01

Effect of Flange Rotation and Gasket Width on Leakage Behavior of Bolted Flanged Joints: Part 1, Part 2, & Part 3
法兰旋转和垫片宽度对螺栓法兰接头泄漏行为的影响:第1部分、第2部分和第3部分

Exhaust gas lines on ships - Gaskets - Part 1: For flanged connections heavy design
船舶排气管.垫片.第1部分:重型法兰连接件

2014-03-01

液压传动连接 法兰连接 第1部分:3.5 MPa～35 MPa、DN13～DN127系列
Connections for hydraulic fluid power—Flange connections—Part 1: Series of 3.5 MPa to 35 MPa, DN13 to DN127

2022-12-30

Welding necks for glass lined vessels - Part 1: Form H main flanges for clamp screw connections - Connecting dimensions
搪玻璃容器的焊接颈.第1部分:夹紧螺钉连接用H型主法兰.连接尺寸

2019-05-01

Disc wheels for motor vehicles and trailers - Part 1: Connection dimensions for bolt- and mixed centering
机动车辆和挂车用圆盘轮第1部分:螺栓和混合定心连接尺寸

2008-06-01

Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
法兰及其连接件.带垫圈的圆形法兰连接件的设计规则.第4部分:装配在符合压力设备指令的设备上的螺栓连接件的人员能力鉴定

2010-01-05

3D-Finite Modeling of Bolted Flanged Joints and Development of a Transducer for Measuring Gasket Contact Stress: Part 1 & Part 2
螺栓法兰接头的三维有限元建模和垫片接触应力测量传感器的开发:第1部分和第2部分

Авиация и космонавтика. Присоединения агрегатов к изделию. Вспомогательные приводы и монтажные фланцы (метрическая серия). Часть 1. Критерии проектирования
航天 附件到产品的连接 附件驱动器和安装法兰（公制系列） 第1部分设计标准

Draft Document - Disc wheels for motor vehicles and trailers - Part 1: Connection dimensions for bolt- and mixed centering
文件草案.机动车辆和挂车用圆盘轮.第1部分:螺栓和混合定心的连接尺寸

2006-05-01

BS EN 1591-4. Flanges and their joints. Design rules for gasketed circular flange connections. Part 4. Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
英国标准EN 1591-4 法兰及其接头 垫圈圆形法兰连接的设计规则 第四部分 根据压力设备指令 对安装在设备上的螺栓接头组装人员进行资格鉴定

2011-11-10

Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive; German version CEN/TS 1591-4:2007
法兰及其连接件.带垫圈的圆形法兰连接件的设计规则.第4部分:装配在符合压力设备指令的设备上的螺栓连接件的人员能力鉴定；德文版CEN/TS 1591-4:2007

2007-10-01

Connections for hydraulic fluid power and general use — Hose fittings — Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
液压传动和通用连接件.软管接头.第3部分:带ISO 6162-1或ISO 6162-2法兰端的软管接头

2021-10-29

Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
液压流体动力——带分体式或一体式法兰夹和公制或英制螺钉的法兰连接件第1部分:压力为3.5 MPa（35 bar）至35 MPa（350 bar）、DN 13至DN 127的法兰接头、端口和安装面

2012-12-14