1.1 本木质结构板韧性试验方法包括通过梁试样的冲击载荷确定导致破坏所需的能量，梁试样在跨中简单支撑和加载。使用中的木结构面板包括胶合板、定向刨花板、单板和木基层复合材料。 1.2 以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 3.1 木基材料在冲击载荷下的失效有时是设计考虑中的一个重要标准。此外，通过测量木材的韧性，可以最好地评估对木材机械性能的一些影响，例如腐朽。本试验方法用于评估结构面板产品的韧性，同时 D143 可用于测量实心透明木材试样的韧性。

1.1 This test method for toughness of wood structural panels covers the determination of energy necessary to cause failure by impact loading of a beam specimen which is simply supported and loaded at midspan. Wood structural panels in use include plywood, oriented strand board, and composites of veneer and of wood-based layers. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 3.1 The failure of wood-based materials with impact loads is sometimes an important criteria in design considerations. In addition, some effects on the mechanical properties of wood, such as decay, are best evaluated by measuring its toughness. This test method serves to evaluate the toughness of structural panel products while Methods D143 can be used to measure the toughness of solid clear wood specimens.