1.1 本规范涵盖了矩形镀银平板玻璃镜的要求，该镜以切割尺寸、坯料片或退火炉端提供，且未进行进一步加工（如边缘加工或其他制造）。 1.2 本规范仅涵盖6 mm以下镀银退火单片透明和着色平板玻璃镜的质量要求( 1. / 4. 英寸）厚。镜子用于室内的镜子玻璃、装饰配件组件或类似用途。 1.3 本规范不涉及安全玻璃材料，也不涉及镜子应用的要求。有关安全玻璃应用，请参阅建筑规范范本和其他适用标准。 1.4 本规范中涵盖的镜子不适用于高湿度或空气传播腐蚀促进剂或两者同时存在的环境（如游泳池区域、海洋- 移动容器、化学实验室和其他腐蚀性环境）。 1.5 以公制单位表示的尺寸值应视为标准。括号中给出的英寸磅单位仅供参考。 1.6 本标准并不旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This specification covers the requirements for silvered flat glass mirrors of rectangular shape supplied as cut sizes, stock sheets, or as lehr ends and to which no further processing (such as edgework or other fabrication) has been done. 1.2 This specification covers the quality requirements of silvered annealed monolithic clear and tinted flat glass mirrors only, up to 6 mm ( 1 / 4 in.) thick. The mirrors are intended to be used indoors for mirror glazing, for components of decorative accessories or for similar uses. 1.3 This specification does not address safety glazing materials nor requirements for mirror applications. Consult model building codes and other applicable standards for safety glazing applications. 1.4 Mirrors covered in this specification are not intended for use in environments where high humidity or airborne corrosion promoters, or both, are consistently present (such as swimming pool areas, ocean-going vessels, chemical laboratories, and other corrosive environments). 1.5 The dimensional values stated in metric units are to be regarded as the standard. The inch-pound units given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.