SAE AMS7037-耐腐蚀耐热钢添加剂制造用粉末 17Cr-13Ni-2.5Mo（316L）-国家数字标准馆

现行 SAE AMS7037

到馆提醒

收藏跟踪

购买正版

Steel, Corrosion and Heat-Resistant, Powder for Additive Manufacturing, 17Cr - 13Ni - 2.5Mo (316L) 耐腐蚀耐热钢添加剂制造用粉末 17Cr-13Ni-2.5Mo（316L）

发布日期： 2021-11-23

本规范的预期上限是，所提供粉末的粒度分布（PSD）应小于60目（250微米），且不允许任何大于40目（425微米）的粉末（0.0 wt.%）。

The intended upper bound of this specification is that the particle size distribution (PSD) of powders supplied shall be <60 mesh (250 microns) and that no powder (0.0 wt.%) greater than 40 mesh (425 microns) is allowed.

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

现行

SAE AMS7021

Precipitation Hardenable Steel Alloy, Corrosion and Heat Resistant, Powder for Additive Manufacturing, 15.0Cr - 4.5Ni - 3.5Cu - 0.30Nb
沉淀硬化钢合金耐腐蚀和耐热添加剂制造用粉末 15.0Cr-4.5Ni-3.5Cu-0.30Nb

2020-11-19

现行

SAE AMS7012

Precipitation Hardenable Steel Alloy, Corrosion and Heat-Resistant Powder for Additive Manufacturing 16.0Cr - 4.0Ni - 4.0Cu - 0.30Nb
添加剂制造用沉淀硬化钢合金耐腐蚀耐热粉末16.0Cr-4.0Ni-4.0Cu-0.30Nb

2019-11-14

现行

SAE AMS7001

Nickel Alloy, Corrosion and Heat-Resistant, Powder for Additive Manufacturing, 62Ni - 21.5Cr - 9.0Mo - 3.65Nb
耐腐蚀耐热镍合金添加剂制造用粉末 62Ni-21.5Cr-9.0Mo-3.65Nb

2018-06-08

现行

SAE AMS7035

Precipitation Hardenable Steel Alloy, Corrosion and Heat-Resistant, Powder for Binder Jet Additive Manufacturing, 16.0Cr - 4.0Ni - 4.0Cu - 0.30Nb
沉淀硬化钢合金耐腐蚀和耐热粘合剂喷射添加剂制造用粉末 16.0Cr-4.0Ni-4.0Cu-0.30Nb

2021-06-22

现行

SAE AMS7013

Nickel Alloy, Corrosion and Heat-Resistant, Powder for Additive Manufacturing, 60Ni - 22Cr - 2.0Mo - 14W - 0.35Al - 0.03La
耐腐蚀耐热镍合金添加剂制造用粉末 60Ni-22Cr-2.0Mo-14W-0.35Al-0.03La

2019-01-03

现行

SAE AMS7008

Nickel Alloy, Corrosion and Heat-Resistant, Powder for Additive Manufacturing, 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe
镍合金耐腐蚀和耐热添加剂制造用粉末 47.5Ni-22Cr-1.5Co-9.0Mo-0.60W-18.5Fe

2019-03-26

现行

SAE AMS7006

Nickel Alloy, Corrosion- and Heat-Resistant, Powder for Additive Manufacturing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe
耐腐蚀耐热镍合金添加剂制造用粉末52.5Ni-19Cr-3.0Mo-5.1Cb（Nb）-0.90Ti-0.50Al-18Fe

2022-03-21

现行

SAE AMS5924

Nickel Alloy, Corrosion and Heat-Resistant, 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Powder for General Applications including Metal Injection Molding and Additive Manufacturing without Special Powder Manufacturing Controls
镍合金耐腐蚀和耐热 47.5Ni-22Cr-1.5Co-9.0Mo-0.60W-18.5Fe粉末用于一般应用包括金属注射成型和添加剂制造无需特殊粉末制造控制

2019-01-14

现行

SAE AMS5952

Nickel Alloy, Corrosion- and Heat-Resistant, Welding and Additive Manufacturing Wire 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B (282) Vacuum Induction Melted and Electroslag or Vacuum Remelted Solution Heat Treated, Cold Worked, Precipitation Heat Treatable
耐腐蚀和耐热镍合金焊接和增材制造焊丝57Ni-20Cr-10Co-8.5Mo-2.1Ti-1.5Al-0.005B（282）真空感应熔化和电渣或真空重熔固溶热处理、冷加工、沉淀热处理

2023-11-15