IEC 60335-2-29:2016作为IEC 60335-2-29:2016 RLV提供，其中包含国际标准及其红线 版本，显示技术内容与 上一版。 IEC 60335-2-29:2016涉及输出不超过120 V无纹波直流电、额定电压不超过250 V的家用和类似用途电池充电器的安全性。用于在IEC 60335系列标准范围之外的家庭最终用途应用中为电池充电的电池充电器属于本标准的范围。附录AA给出了供至少8岁儿童在无人看管的情况下使用的电池充电器的要求。不打算用于正常家庭使用，但可能对公众造成危险的电池充电器，如打算用于车库、商店、轻工业和农场的电池充电器，都在本标准的范围内。在可行的情况下，本标准涉及家庭内外所有人都会遇到的电器带来的常见危险。然而，一般来说，它没有考虑到身体、感官或精神能力的人（包括儿童）；或缺乏经验和知识使他们无法在没有监督或指导的情况下安全使用器具；玩电器的孩子们。本标准不适用于内置: -电池充电器，安装在大篷车和类似车辆上的充电器除外； -电池充电器，所述电池充电器是电器的一部分，所述电器的电池是用户不可接近的； -专用于工业用途的电池充电器； -拟用于存在特殊条件的场所的电池充电器，例如存在腐蚀性或爆炸性环境（灰尘、蒸汽或气体）；-应急照明或电子设备电源单元的电池充电器。第五版取消并取代了2002年出版的第四版，包括其修正案1（2004年）和修正案2（2009年）。它构成技术修订。与IEC 60335-2-29第四版相比，本版主要变化如下（次要变化未列出）: -修订跌落试验以参考IEC 60068-2-31（21.101）； -低温下使用的电池充电器上的电源线要求（25.7）； -增加了对输出电压超过SELV的电池充电器的要求（1、3.2.2、3.4.3、10.101、24.4、25.5、25.7、25.8、25.15.26.5）； -在第1条第7款中增加了户外使用的电池充电器的分类（6.2、29.2）和一些注释。1和22.102、图101和附件AA 11.8已转换为规范性文本。 它是在该标准第五版（2010年）的基础上建立的。请国家委员会注意，设备制造商和测试组织在新的、修订的或修订的IEC出版物出版后可能需要一个过渡期，以便根据新的要求制造产品，并为进行新的或修订的测试做好准备。委员会建议，该标准的内容应在自发布之日起不早于12个月或不晚于36个月内通过，以便在全国范围内实施。 关键词:蓄电池,蓄电池充电器 本出版物应与IEC 60335-1:20 10一起阅读。

IEC 60335-2-29:2016 is available as IEC 60335-2-29:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60335-2-29:2016 deals with the safety of electric battery chargers for household and similar use having an output not exceeding 120 V ripple-free direct current, their rated voltage being not more than 250 V. Battery chargers intended for charging batteries in a household end use application outside the scope of the IEC 60335 series of standards are within the scope of this standard. Requirements for battery chargers for use by children at least 8 years old without supervision are given in Annex AA. Battery chargers not intended for normal household use, but which nevertheless may be a source of danger to the public, such as battery chargers intended for use in garages, shops, light industry and on farms, are within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction; children playing with the appliance. This standard does not apply to built-in:
- battery chargers, except those for installing in caravans and similar vehicles;
- battery chargers that are part of an appliance, the battery of which is not accessible to the user;
- battery chargers intended exclusively for industrial purposes;
- battery chargers intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas);
- battery chargers for emergency lighting or supply units for electronic equipment. This fifth edition cancels and replaces the fourth edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2009). It constitutes a technical revision. The principal changes in this edition as compared with the fourth edition of IEC 60335-2-29 are as follows (minor changes are not listed):
- Revised the drop test to refer to IEC 60068-2-31 (21.101);
- Requirements for supply cords on battery chargers used at low temperatures (25.7);
- Requirements for battery chargers having an output voltage exceeding SELV have been added (1, 3.2.2, 3.4.3, 10.101, 24.4, 25.5, 25.7, 25.8, 25.15. 26.5);
- A classification for battery chargers used outdoors has been added (6.2, 29.2) and some notes in Clause 1, Subclauses 7.1 and 22.102, Figure 101 and Annex AA 11.8 have been converted to normative text. It was established on the basis of the fifth edition (2010) of that standard. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this standard be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of its publication. Key words: Battery, Battery Charger

This publication is to be read in conjunction with IEC 60335-1:2010.