请注意:此版本的所有临时修订版将在您购买时提供。本地防盗报警装置和系统SUL 6091范围1。1这些要求包括用于商业场所、商业保险箱和保险库、银行保险箱和保险库的本地防盗报警装置和系统的构造、性能和维护。1.2根据这些要求，本地报警系统由保护电路和装置组成，通过控制装置连接到安装在受保护财产所在建筑物外墙上的封闭式防篡改发声装置。 侵入或干扰装置或接线会导致发声装置启动。发声装置继续工作，直到通过使用适当的控制键、耗尽电源或通过自动定时元件的动作停止为止，该自动定时元件预设了一定的工作时间。这些系统通常在《国家电气规范》NFPA 70.1.3第725条规定的2类远程控制和信号电路的2类远程控制和信号电路范围内运行。本地报警系统的运行部分由业主或其他对该物业感兴趣的人控制和支配。 然而，要求在安装公司的照管和定期检查服务下维护系统。安装公司应在业主报告后立即对故障或服务要求做出响应。参见维护，第57和65节。业主有责任打开和关闭系统，并向服务公司报告系统故障。1.4本地商业防盗报警系统旨在保护商业场所或商业保险箱和保险库。 1.4修订版于2007年3月17日生效。本地银行防盗报警系统旨在保护银行保险箱和保险库。1.5修订版于2007年3月17日生效71.6拟用于组合防盗报警和消防信号系统的设备应符合《火灾报警系统控制单元和附件标准》UL 864.1.6修订版于20101年1月6日。7安装在各物业上的设备根据每个位置的防护程度进一步分类。涉及各个位置报警设备安装和分类（范围）的规则发布在《防盗和滞留报警系统安装和分类标准》（UL 681）中，防盗人员应参考该标准- 警报安装人员。1.7修订版，自20071年3月17日起生效。8包含新特性、特性、组件、材料或系统的产品，或与本标准要求中包含的特性、特性、组件、材料或系统不同的产品，对于涉及火灾、触电或人身伤害风险的，应使用适当的附加部件和最终产品要求进行评估，以保持本标准意图最初预期的安全水平。如果产品的特征、特性、组件、材料或系统与本标准的特定要求或规定相冲突，则该产品不符合本标准。 应按照制定、修订和实施本标准所采用的方法，提出并采用要求的修订。1.8 1999年2月24日修订

Please note: All interim revisions for this edition available at time of your purchase will be included.Local Burglar Alarm Units and SystemsUL 6091 Scope1.1 These requirements cover construction, performance, and maintenance of local burglar-alarm units and systems for use in mercantile premises, mercantile safes and vaults, and bank safes and vaults.1.2 As covered by these requirements, a local alarm system consists of protective circuits and devices, connected through control apparatus to an enclosed tamper-protected sounding device mounted on an outside wall of the building in which the protected property is situated. Intrusion into or disturbance of the units or wiring causes the sounding device to be actuated. The sounding device continues to operate until it is stopped by using the proper control key, by exhaustion of the power supply, or by action of an automatic timing element that is preset for a definite operating period. These systems usually operate within the limits of Class 2 remote control and signal circuits of Class 2 remote control and signal circuits as defined by Article 725 of the National Electrical Code, NFPA 70.1.3 The operation of a local alarm system is partially under the control and domination of the owners or others interested in the property. However, it is required that systems be maintained under the care and regular inspection service of the installing company. The installing company is expected to respond to troubles or calls for service promptly on report of the owner. See Maintenance, Sections 57 and 65. It is the responsibility of the owner to switch the system ON and OFF duty and to report malfunctioning of the system to the service company.1.4 Local mercantile burglar-alarm systems are intended for the protection of mercantile premises or mercantile safes and vaults.1.4 revised effective March 17, 20071.5 Local bank burglar-alarm systems are intended for the protection of bank safes and vaults.1.5 revised effective March 17, 20071.6 Equipment intended for combination burglar-alarm and fire-protective signaling systems shall comply with the Standard for Control Units and Accessories for Fire Alarm Systems, UL 864.1.6 revised January 6, 20101.7 Devices installed on individual properties are further classified as to extent of protection at each location. Rules covering installation and classification (of extent) of alarm equipment at individual locations are published in the Standard for Installation and Classification of Burglar and Holdup Alarm Systems, UL 681, which should be consulted by burglar-alarm installers.1.7 revised effective March 17, 20071.8 A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shock or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.1.8 revised February 24, 1999