BS ISO 6336-5:2016描述了接触应力和齿根应力，并给出了两个极限的数值 强调数字。它规定了材料质量和热处理的要求，并对 它们对两种极限应力值的影响。符合本文件的数值适用于提供的计算程序 在ISO 6336-2、ISO 6336-3和ISO 6336-6中，以及在工业高速列车的应用标准中 以及船用齿轮。它们适用于ISO 10300中给出的额定值计算程序 锥齿轮的承载能力。本文件适用于所有传动装置、基本齿条轮廓、齿廓 这些标准涵盖的尺寸、设计等。计算结果与其他实验结果吻合良好 ISO 6336-1和ISO 10300-1规定范围内的方法。交叉引用:ISO 53ISO 642ISO 643:2012ISO 683-1ISO 683-2ISO 683-3ISO 683- 4ISO 683-5ISO 1328-1ISO 2639ISO 3754ISO 4948-2ISO 4967ISO 6336-1ISO 6336-2ISO 6336-3:2006ISO 9443ISO 10474ISO 14104ISO 18265EN 10204EN 10228-1EN 10228-3EN 10308ASTM A388-01ASTM A609-91ASTM E428-00ASTM E1444-01ISO 1122-1ISO 6336-6ISO 6506-1ISO 6507-1ISO 2407-1ISO AMS 2430SSAE AMS 2432DJ 2441购买本产品时，包括所有当前可用的修改件文件

BS ISO 6336-5:2016 describes contact and tooth-root stresses and gives numerical values for both limit stress numbers. It specifies requirements for material quality and heat treatment and comments on their influences on both limit stress numbers.Values in accordance with this document are suitable for use with the calculation procedures provided in ISO 6336-2, ISO 6336-3 and ISO 6336-6 and in the application standards for industrial, high-speed and marine gears. They are applicable to the calculation procedures given in ISO 10300 for rating the load capacity of bevel gears. This document is applicable to all gearing, basic rack profiles, profile dimensions, design, etc., covered by those standards. The results are in good agreement with other methods for the range indicated in the scope of ISO 6336-1 and ISO 10300-1.Cross References:ISO 53ISO 642ISO 643:2012ISO 683-1ISO 683-2ISO 683-3ISO 683-4ISO 683-5ISO 1328-1ISO 2639ISO 3754ISO 4948-2ISO 4967ISO 6336-1ISO 6336-2ISO 6336-3:2006ISO 9443ISO 10474ISO 14104ISO 18265EN 10204EN 10228-1EN 10228-3EN 10308ASTM A388-01ASTM A609-91ASTM E428-00ASTM E1444-01ISO 1122-1ISO 6336-6ISO 6506-1ISO 6507-1ISO 6508-1ISO 12107SAE AMS 2430SSAE AMS 2432DSAE J 2441All current amendments available at time of purchase are included with the purchase of this document.