Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of ceramic tube and rings
精细陶瓷(高级陶瓷、高级工业陶瓷) 测定陶瓷管和环的弹性模量和弯曲强度的试验方法
发布日期:
2015-05-31
BS ISO 18558:2015规定了测定弹性模量和弹性模量的试验方法
用劈裂压缩试验测定陶瓷管或环在环境温度下的弯曲强度
戒指。试件制备方法、试验模式和加载速率、数据收集和报告
处理程序。本国际标准主要适用于陶瓷材料,包括整体精细陶瓷,
玻璃、晶须或颗粒增强陶瓷复合材料,但不适用于纤维增强陶瓷
复合材料。本试验方法可用于材料研究、质量控制和表征
并设计数据生成目的。交叉引用:ISO 7500-1ISO 14704ISO 3611BS EN 843-7:2010ASTM C 1323-10:2010ISO/IEC 17025:2005购买本文件时提供的所有现行修订版均包含在购买本文件中。
BS ISO 18558:2015 specifies the testing method for determining the elastic modulus and
bending strength of ceramic tubes or rings at ambient temperature by the compression tests on split
ring pieces. Methods for test piece preparation, test modes and load rates, data collection, and reporting
procedures are addressed.This International Standard applies primary to the ceramic materials including monolithic fine ceramic,
glass, whisker- or particulate reinforced ceramic composites, but not available for fibre reinforced ceramic
composites. This test method may be used for material research, quality control, and characterization
and design data generation purpose.Cross References:ISO 7500-1ISO 14704ISO 3611BS EN 843-7:2010ASTM C 1323-10:2010ISO/IEC 17025:2005All current amendments available at time of purchase are included with the purchase of this document.