首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM F541-12(2020)
到馆提醒
收藏跟踪
购买正版
Standard Specification for Alloy Steel Eyebolts 合金钢吊钩标准规范
发布日期: 2020-12-01
1.1 本规范涵盖锻造、淬火和回火的合金钢螺纹吊环螺栓,其韧性性能得到改善,主要用于低温应用。吊环螺栓的化学和冶金结构可产生较低的转变温度,以尽量减少脆性破坏。最大螺纹尺寸为2.500英寸。(63.50毫米)。 1.2 吊环螺栓有两种类型,如下所示: 1.2.1 类型1- 直柄吊环螺栓。 1.2.2 类型2- 肩部吊环螺栓。 1.3 以英寸-磅为单位的数值应视为标准值。 括号中的值仅供参考。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。
1.1 This specification covers forged, quenched and tempered, alloy steel threaded eyebolts with improved toughness properties and intended primarily for low temperature applications. The eyebolts are chemically and metallurgically constituted to produce a low transition temperature to minimize brittle failure. Maximum thread size is 2.500 in. (63.50 mm). 1.2 The eyebolts are furnished in two types, as follows: 1.2.1 Type 1— Straight Shank Eyebolt. 1.2.2 Type 2— Shoulder Eyebolt. 1.3 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: F16.02
相似标准/计划/法规
现行
ASTM A489-18e1
Standard Specification for Carbon Steel Eyebolts
碳钢吊环螺栓的标准规范
2018-03-01
现行
ASTM A681-24
Standard Specification for Tool Steels Alloy
工具钢合金标准规范
2024-05-01
现行
ASTM A322-24
Standard Specification for Steel Bars, Alloy, Standard Grades
钢棒 合金 标准等级标准规格
2024-10-15
现行
ASTM A355-89(2022)
Standard Specification for Steel Bars, Alloys, for Nitriding
氮化用合金钢棒
2022-09-01
现行
ASTM A829/A829M-17
Standard Specification for Alloy Structural Steel Plates
合金结构钢板标准规范
2017-03-15
现行
ASTM A1016/A1016M-24a
Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
铁素体合金钢 奥氏体合金钢和不锈钢管的一般要求标准规范
2024-10-15
现行
ASTM F912-11(2017)
Standard Specification for Alloy Steel Socket Set Screws
合金钢套筒螺钉标准规格
2017-06-01
现行
ASTM A401/A401M-24
Standard Specification for Steel Wire, Chromium-Silicon Alloy
铬硅合金钢丝标准规范
2024-08-15
现行
ASTM F3329-18(2024)
Standard Specification for Carbon and Alloy Steel Metric Rivets
碳钢和合金钢公制铆钉标准规范
2024-09-01
现行
ASTM A540/A540M-24
Standard Specification for Alloy-Steel Bolting for Special Applications
特殊应用合金钢螺栓连接的标准规范
2024-03-01
现行
ASTM A689-97(2018)
Standard Specification for Carbon and Alloy Steel Bars for Springs
用于弹簧的碳钢和合金钢棒的标准规范
2018-09-01
现行
ASTM A973/A973M-21
Standard Specification for Grade 100 Alloy Steel Chain
100级合金钢链标准规范
2021-01-01
现行
ASTM A391/A391M-21
Standard Specification for Grade 80 Alloy Steel Chain
80级合金钢链标准规范
2021-01-01
现行
ASTM A837/A837M-17(2022)
Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
渗碳用合金钢锻件标准规范
2022-03-01
现行
ASTM A320/A320M-24a
Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
低温用合金钢和不锈钢螺栓的标准规范
2024-10-15
现行
ASTM A574-21
Standard Specification for Alloy Steel Socket-Head Cap Screws
合金钢内六角螺钉标准规范
2021-12-01
现行
ASTM A519/A519M-24a
Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
无缝碳合金钢机械管标准规范
2024-10-15
现行
ASTM B432-19
Standard Specification for Copper and Copper Alloy Clad Steel Plate
铜和铜合金复合钢板的标准规范
2019-04-01
现行
ASTM A231/A231M-24
Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
铬钒合金钢弹簧钢丝标准规范
2024-08-15
现行
ASTM A563/A563M-24
Standard Specification for Carbon and Alloy Steel Nuts (Inch and Metric)
碳钢和合金钢螺母标准规范(英寸和公制)
2024-09-01