请注意:此版本的所有临时修订版将在您购买时提供。全充气娱乐个人漂浮设备SUL 11801 Scope1。1这些要求包括至少有一个浮力室的成人娱乐可穿戴设备，该浮力室依赖于气体或其他介质的充气，为穿戴者提供漂浮，供至少16岁、体重为80磅（36.3千克）或以上的个人使用。1.2这些要求包括用于一般划船活动的装置，这些装置与水或其他物体发生碰撞（即:。 e、 那些发生在滑水、白水划船、个人船艇使用和伞帆时的情况不太可能发生。1.3这些要求包括本标准所涵盖设备的重新装备套件。1.4本标准规定了多个性能等级，以满足各种划船活动、位置和水条件的需要。性能级别由性能类型指定。1.5对于包含新特性、特性、组件、材料或系统的产品，或与本标准要求所涵盖的特性、特性、组件、材料或系统不同的产品，以及涉及火灾、触电或人身伤害风险的产品，应使用适当的附加组件和终端进行评估- 保持本标准意图最初预期的安全水平的产品要求。如果产品的特征、特性、组件、材料或系统与本标准的特定要求或规定相冲突，则该产品不符合本标准。应按照制定、修订和实施本标准所采用的方法，提出并采用要求的修订。

Please note: All interim revisions for this edition available at time of your purchase will be included.Fully Inflatable Recreational Personal Flotation DevicesUL 11801 Scope1.1 These requirements cover adult recreational wearable devices having at least one buoyancy compartment that relies upon inflation by gas or other medium to provide flotation to the wearer, for use by individuals at least 16 years of age and weighing 80 pounds (36.3 kg) or more.1.2 These requirements cover devices intended for general boating activities where impacts with the water or other objects (i.e. those which occur during water skiing, white water paddling, personal watercraft use, and parasailing) are not likely.1.3 These requirements cover rearming kits for the devices covered by this Standard.1.4 Several levels of performance are set out by this standard to meet the needs of various boating activities, locations, and water conditions. The performance levels are designated by performance type.1.5 A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shock or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.