1.1 本规范规定了用于辐射处理的常规剂量测定系统的校准要求，包括建立测量可追溯性和使用校准的剂量测定系统估计测量剂量的不确定性。 附注1: 许多国家存在管理某些辐射处理应用的法规或其他指令，如医疗保健产品的灭菌和食品的辐射处理，要求吸收剂量测量可追溯到国家或国际标准（ISO 11137-1，参考文献 ( 1- 3 ) 2 ). 1.2 覆盖的吸收剂量范围高达1 MGy。 1.3 涵盖的辐射类型是能量从80 keV到25 MeV的光子和电子。 1.4 本文件是为在辐射处理中正确实施剂量测定提供建议的一组标准之一，并描述了实现符合ASTM要求的方法 E2628 “辐射处理中剂量测定实施规程”，用于常规剂量测定系统的校准。它旨在与ASTM一起阅读 E2628 以及第节中引用的被校准剂量测定系统的相关ASTM标准实践 2 . 1.5 本标准并不旨在解决与其使用相关的所有安全性问题（如果有）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践并确定法规限制的适用性。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。======意义和用途====== 4.1 电离辐射用于在产品中产生各种期望的效果。应用的例子包括医疗产品的灭菌、微生物的减少、聚合物和电子器件的改性以及油墨、涂料和粘合剂的固化 ( 4 ) . 4.2 有必要进行吸收剂量测量，包括统计控制和文件，以确保产品获得所需的吸收剂量。这些控制包括一个解决常规剂量测定系统校准要求的程序。 4.3 本文件中描述的常规剂量测定系统校准程序为用户提供了剂量测定系统，其剂量测量可追溯到国家或国际使用条件标准（参见 附件A4 ).剂量测定系统校准是用户测量管理系统的一部分。

1.1 This practice specifies the requirements for calibrating routine dosimetry systems for use in radiation processing, including establishing measurement traceability and estimating uncertainty in the measured dose using the calibrated dosimetry system. Note 1: Regulations or other directives exist in many countries that govern certain radiation processing applications such as sterilization of healthcare products and radiation processing of food requiring that absorbed-dose measurements be traceable to national or international standards (ISO 11137-1, Refs ( 1- 3 ) 2 ). 1.2 The absorbed-dose range covered is up to 1 MGy. 1.3 The radiation types covered are photons and electrons with energies from 80 keV to 25 MeV. 1.4 This document is one of a set of standards that provides recommendations for properly implementing dosimetry in radiation processing, and describes a means of achieving compliance with the requirements of ASTM E2628 “Practice for Dosimetry in Radiation Processing” for the calibration of routine dosimetry systems. It is intended to be read in conjunction with ASTM E2628 and the relevant ASTM standard practice for the dosimetry system being calibrated referenced in Section 2 . 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 Ionizing radiation is used to produce various desired effects in products. Examples of applications include the sterilization of medical products, microbial reduction, modification of polymers and electronic devices, and curing of inks, coatings, and adhesives ( 4 ) . 4.2 Absorbed-dose measurements, with statistical controls and documentation, are necessary to ensure that products receive the desired absorbed dose. These controls include a program that addresses requirements for calibration of routine dosimetry system. 4.3 A routine dosimetry system calibration procedure as described in this document provides the user with a dosimetry system whose dose measurements are traceable to national or international standards for the conditions of use (see Annex A4 ). The dosimetry system calibration is part of the user’s measurement management system.