首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ISO 15747:2018
到馆阅读
收藏跟踪
购买正版
Plastic containers for intravenous injections 用于静脉注射的塑料容器
发布日期: 2018-09-20
本文件规定了非肠道用塑料容器的安全搬运和物理、化学和生物测试要求。 本文件适用于具有一个或多个腔室且总标称容量在50 ml至5000 ml范围内的非肠道用塑料容器,例如用于直接注射(注射)溶液的薄膜袋或吹塑塑料瓶。 注:在一些国家,国家或地区药典或其他政府法规具有法律约束力,这些要求优先于本文件。
This document specifies requirements to the safe handling and the physical, chemical and biological testing of plastic containers for parenterals. This document is applicable to plastic containers for parenterals having one or more chambers and having a total nominal capacity in the range of 50 ml to 5 000 ml such as film bags or blow-moulded plastic bottles for direct administration of infusion (injection) solutions. NOTE In some countries, national or regional pharmacopoeias or other government regulations are legally binding and these requirements take precedence over this document.
分类信息
关联关系
研制信息
归口单位: ISO/TC 76
相似标准/计划/法规
现行
BS EN ISO 15747-2019
Plastic containers for intravenous injections
静脉注射用塑料容器
2019-03-11
现行
KS P ISO 15747
정맥 주사용 플라스틱 용기
用于静脉注射的塑料容器
2019-11-25
现行
KS P ISO 15747
정맥 주사용 플라스틱 용기
静脉注射用塑料容器
2021-06-28
现行
UNE-EN ISO 15747-2010
Plastic containers for intravenous injections (ISO 15747:2010)
静脉注射用塑料容器(ISO 15747-2010)
2010-09-15
现行
BS EN ISO 8362-7-2010
Injection containers and accessories-Injection caps made of aluminium-plastics combinations without overlapping plastics part
注射容器和配件
2010-12-31
现行
KS P ISO 8362-7
주사 용기와 액세서리 — 제7부: 플라스틱 덮개가 없는 알루미늄-플라스틱 복합 재질의 주사 캡
注塑容器和附件 - 第7部分:由铝 - 塑料组合而成的注塑帽无重叠塑料零件
2020-12-30
现行
ISO 8362-7-2006
Injection containers and accessories — Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
注射容器和附件第7部分:无重叠塑料部件的铝塑复合材料制成的注射帽
2006-04-19
现行
KS P ISO 8362-6
주사 용기와 액세서리 — 제6부: 주사 바이알용 알루미늄-플라스틱 복합 재질의 캡
注射容器和附件 - 第6部分:由注塑瓶的铝塑料组合制成的盖子
2020-12-30
现行
ISO 8362-6-2010
Injection containers and accessories — Part 6: Caps made of aluminium-plastics combinations for injection vials
注射容器和附件第6部分:注射瓶用铝塑复合材料制成的瓶盖
2010-06-01
现行
DIN ISO 8362-6
Injection containers for injectables and accessories; caps made of aluminium-plastics combinations for injection vials; identical with ISO 8362-6:1992
注射剂和附件的注射容器;注射瓶用铝塑复合材料制成的瓶盖;与ISO 8362-6:1992相同
1993-06-01
现行
DIN ISO 8362-7
Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006)
注射容器和附件.第7部分:无重叠塑料件的铝塑料组合注射帽(ISO 8362-7-2006)
2007-06-01
现行
DIN EN ISO 8362-7
Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006)
注射容器和附件.第7部分:无重叠塑料件的铝塑料组合注射帽(ISO 8362-7-2006)
2011-03-01
现行
DIN EN ISO 8362-6
Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials (ISO 8362-6:2010)
注射容器和附件.第6部分:注射瓶用铝塑料组合盖(ISO 8362-6-2010);德文版EN ISO 8362-6:2011
2011-07-01