1.1 本试验程序提供了一种定量实验室方法，用于确定真空吸尘器沿墙壁和底板的边缘清洁效果。 1.2 本试验方法适用于家用和商用立式、筒式、组合式、棒式和手持式真空吸尘器。 1.3 以国际单位制表示的数值应视为标准值。括号中给出的值仅供参考。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 本试验方法提供了真空吸尘器清除污垢/灰尘的距离墙壁或底板的指示。实验室测试中清除的污垢量可能与家庭中的不同；然而，这将表明，在大多数情况下，在实验室表现良好的真空吸尘器在家中也会表现良好。实验室结果可能因房屋的不同而不同:地毯、污垢和其他因素。 注1: 该测试方法的主要目标不是评估给定产品去除的污垢或灰尘碎片的程度或数量，而是评估真空吸尘器距离墙壁或底板的距离。 4.2 为了为测量中所述的性能提供统一的基础 1.1 ，在该程序中使用了标准测试地毯和测试灰尘。

1.1 This test procedure provides a quantitative laboratory method for determining the edge cleaning effectiveness of a vacuum cleaner along walls and baseboards. 1.2 This test method is applicable to household and commercial types of upright, canister, combination, stick and hand held vacuum cleaners. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 This test method provides an indication of how close to a wall or baseboard a vacuum cleaner removes dirt/dust. The amount of dirt removed in the laboratory test may not be the same as in a home; however, it will show that, in most cases, a vacuum cleaner that performs well in the laboratory will perform well in a home. Laboratory results may differ due to variations in the homes: carpets, dirt, and other factors. Note 1: The primary goal of this test method is not to evaluate the degree or the amount of dirt or dust debris that a given product removes, but rather how close to a wall or baseboard a vacuum has performed some measure of cleaning. 4.2 In order to provide a uniform basis for measuring the performance described in 1.1 , a standardized test carpet and test dust are employed in this procedure.