技术规范BS PD IEC/TS 60079-46:2017规定了 设计、施工、组装、测试、检查、标记、记录和评估 承包商负责的爆炸性环境中使用的设备组件 设备组件的制造商。根据IEC 60079，本文件的要求适用于单个项目 系列或ISO 80079系列，包括组件并具有单独证书。 然后将这些单独的项目整合为设备组件的一部分。还包括 是否要求解决组件可能超出认证范围的方面 构成组件的单个项目。本文件的范围包括评估 危险区域的组件，不包括非危险区域的要求。 假设符合以下其他电气或机械要求: 适用于非危险区域的，将由同一方或另一方进行验证 对本文件要求的补充。交叉引用:IEC 60079-25:2010 Ed 2ISO/IEC 80079-34:2011 Ed 1IEC 60079-14:2013IEC 60079-10-2:2015 Ed 2ISO 80079-36:2016IEC 60079-10-1:2015IEC 60079-0:2011 Ed 6ISO 80079IEC 60079购买时可用的所有当前修订均包含在本文件的购买中。

BS PD IEC/TS 60079-46:2017, which is a technical specification, specifies requirements for the design, construction, assembly, testing, inspection, marking, documenting and assessment of equipment assemblies for use in explosive atmospheres under the responsibility of the manufacturer of the equipment assembly.The requirements of this document apply to individual items according to the IEC 60079 series or ISO 80079 series that comprise the assembly and that have individual certificates. These individual items are then integrated as part of the equipment assembly. Also included are requirements to address aspects for the assembly which may be beyond the certificates of the individual items forming the assembly.The scope of this document includes assessment of the additional requirements for assemblies for hazardous areas and does not include requirements for non-hazardous areas. It is assumed that compliance with other electrical or mechanical requirements that are applicable for non-hazardous areas will be verified by either the same or different party in addition to the requirements of this document.Cross References:IEC 60079-25:2010 Ed 2ISO/IEC 80079-34:2011 Ed 1IEC 60079-14:2013IEC 60079-10-2:2015 ED2ISO 80079-36:2016IEC 60079-10-1: 2015IEC 60079-0:2011 Ed 6ISO 80079IEC 60079All current amendments available at time of purchase are included with the purchase of this document.