Rough castings - General tolerances and machining allowances (For replacement purposes only)
粗钢铸件——一般公差、加工余量；不适合新设计

1998-08-01

Rough castings of grey cast iron - General tolerances and machining allowances (For replacement purposes only)
灰铸铁粗铸件.一般公差和加工余量；不适合新设计

1998-08-01

Rough castings of heavy metal alloys; gravity die castings, general tolerances, machining allowances
重金属合金粗铸件；重力压铸件.一般公差.加工余量

1980-10-01

Rough castings of malleable iron - General tolerances and machining allowances (For replacement purposes only)
可锻铸铁的钢铸件.一般公差和加工余量；不适合新设计

1998-08-01

Rough castings of spheroidal graphite cast iron - General tolerances and machining allowances (For replacement purposes only)
球墨铸铁粗铸件.一般公差和加工余量；不适合新设计

1998-08-01

Rough castings of light metal alloys produced by sand casting - General tolerances and machining allowances (For replacement purposes only)
轻金属合金粗铸件.砂模.一般公差和加工余量；不适合新设计

1998-08-01

Rough castings of heavy metal alloys produced by sand casting - General tolerances and machining allowances (For replacement purposes only)
重金属合金粗铸件.砂模.一般公差和加工余量；不适合新设计

1998-08-01

Rough castings; general tolerance system
粗铸件；通用公差系统

1980-10-01

Heavy metal alloy raw castings; pressure die castings; general tolerances, machining allowances
重金属合金铸件；压铸件；一般公差、加工余量

1986-08-01

Light metal alloy raw castings; pressure die castings; general tolerances, machining allowances
轻金属合金铸件；压铸件；一般公差、加工余量

1986-08-01

Light metal alloy raw castings; gravity die castings; general tolerances, machining allowances
轻金属合金铸件；重力压铸；一般公差、加工余量

1980-10-01

锤上钢质自由锻件机械加工余量与公差 一般要求
Machining allowances and tolerances for steel open die forgings on hammer - General requirement

2008-02-28

Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions
产品几何量技术规范（GPS）.模制零件的尺寸和几何公差.第3部分:使用指示尺寸±公差的铸件的一般尺寸和几何误差以及机加工余量

2023-02-15

Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
产品几何技术规范（GPS）.模制零件的尺寸和几何公差.第3部分:铸件的一般尺寸和几何公差及加工余量（ISO 8062-3-2007）

2009-03-04