1.1 本规程涵盖了报告建筑结构、构件、连接件和组件的结构性能测试的一般用途。描述记录结构数据的条件的综合报告将使其他工人能够复制测试方法，并尽可能复制每种材料或组件的结果，并协调其他人在测试中可能发现的差异。 1.2 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.3 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 本规程提供了一个标准程序，用于报告用于建筑结构、构件、校正和装配的结构测试的数据和结果。它列举并讨论了报告测试方法和实践数据所需的报告部分。书面报告将描述测试的产品、测试方法和结果。

1.1 This practice covers general use in reporting structural performance tests of building constructions, elements, connections, and assemblies. A comprehensive report describing the conditions under which the structural data were recorded will enable other workers to reproduce the test methods and, as nearly as possible, the results for each material or assembly, and to reconcile differences that might be found in tests by others. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 This practice provides a standard procedure for reporting data and results of structural tests used for building constructions, elements, corrections, and assemblies. It enumerates and discusses the report sections required to report data from test methods and practices. The written reports will describe the products tested, method of testing, and results.