Machine Screws, Tapping Screws, and Metallic Drive Screws (Inch Series)
机械螺钉、自攻螺钉和金属传动螺钉（英制系列）

2013-10-11

Wood Screws (Inch Series)
木螺钉（英制系列）

1981-01-01

Screw and Washer Assemblies - SEMS (Inch Series)
螺钉和垫圈组件接缝（英制系列）

2017-01-23

Square Head Set Screws and Slotted Headless Set Screws (Inch Series)
方头固定螺钉和开槽无头固定螺钉（英制系列）

2020-12-31

Helical Coil Screws Thread Inserts-Free Running and Screw Locking (Inch Series)
螺旋线圈螺钉螺纹插入件自由运行和螺钉锁定（英制系列）

2010-08-16

Specification for hexagon socket screws and wrench keys. Inch series
内六角螺钉和扳手键规范 英寸系列

1973-06-15

Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)
内六角头、肩部、固定螺钉和六角键（英制系列）

2013-04-24

Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series
英制和公制系列螺栓、螺钉、双头螺栓和铆钉表面不连续性的标准规范

2020-04-01

INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR
英制系列粗螺纹和细螺纹螺旋线圈标准装配尺寸嵌件

2017-01-31

Nuts for General Applications: Machine Screw Nuts; and Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)
一般用途的螺母:机器螺钉螺母；六角、方形、六角法兰和连接螺母（英制系列）

INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR (SUPERSEDING MS33537D AND MS33646A) (S/S BY NASM33537)
英制粗螺纹和细螺纹螺旋线圈螺纹套头标准装配尺寸（取代MS33537D和MS33646A）

1994-11-15

INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR (SUPERSEDING MS33537D AND MS33646A) (S/S BY NASM33537)
英制粗螺纹和细螺纹螺旋线圈螺纹套头标准装配尺寸（取代MS33537D和MS33646A）

2002-07-03

INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR (SUPERSEDING MS33537D AND MS33646A) (S/S BY NASM33537)
英制系列粗螺纹和细螺纹螺旋线圈标准装配尺寸嵌件（替代MS33537D和MS33646A）（由NASM335337提供）

1991-06-11

Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series), Includes Errata (2013)
方形、六角、重型六角和歪头螺栓以及六角、重型六角、六角法兰、波瓣头和拉力螺钉（英制系列） 包括勘误表（2013年）

2013-04-24

BS EN 4711. Aerospace series. Screw, 12-point flange head (bi hexagonal head bolt), long thread, for tensile applications, continuous fibre reinforced-PEEK composite, temperature range -65 degreesC to 135 degreesC. Inch series
英国标准EN 4711 航空航天系列 拉伸用12点法兰头（双六角头螺栓）长螺纹螺钉 连续纤维增强聚醚醚酮复合材料 温度范围-65摄氏度至135摄氏度 英寸系列

2012-02-27

Screws, 100deg countersunk reduced head, offset crucifrom recess, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 deg C - Inch series
MoS2润滑阳极氧化钛合金制短螺纹紧公差杆斜十字槽100度沉头缩径螺钉.等级:1100 MPa（室温）/315℃.英寸系列

1995-10-31