SAE J2682_201608-通用和流体动力连接件.无螺纹连接件的试验方法-国家数字标准馆

现行 SAE J2682_201608

到馆提醒

收藏跟踪

购买正版

Connections for General Use and Fluid Power - Test Methods-Threadless Connections 通用和流体动力连接件.无螺纹连接件的试验方法

发布日期： 2016-08-31

本SAE标准规定了液压传动应用中无螺纹连接测试的统一方法。这些接头适用于工业设备和商业产品上的一般应用和液压系统。这些连接应能够在从95 kPa真空到制造商规定的工作压力的液压系统中提供防漏连接。由于许多因素会影响液压系统将或不会令人满意地运行的压力，建议用户和制造商进行充分的测试和审查，以确保达到所需的性能水平。

This SAE standard specifies uniform methods for the testing of threadless connections for hydraulic fluid power applications.These connections are intended for general application and hydraulic systems on industrial equipment and commercial products. These connections shall be capable of providing leak proof connections in hydraulic systems operating from 95 kPa vacuum to working pressures specified by the manufacturer.Since many factors influence the pressure at which a hydraulic system will or will not perform satisfactorily, it is recommended that sufficient testing be conducted and reviewed by both the user and manufacturer to ensure that required performance levels are met.

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

BS EN ISO 19879-2021

Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
流体动力和一般用途的金属管接头液压流体动力连接的试验方法

Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections
用于流体动力和一般用途的金属管连接 - 液压流体动力连接的测试方法

DIN EN ISO 19879

Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
流体动力和一般用途的金属管连接件.液压流体动力连接件的试验方法（ISO 19879-2021）；德文版EN ISO 19879:2021

UNE-EN ISO 19879-2010

Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
流体动力和一般用途的金属管连接件.液压流体动力连接件的试验方法（ISO 19879-2010）

SAE J1644_200708

Metallic Tube Connections for Fluid Power and General Use--Test Methods for Threaded Hydraulic Fluid Power Connectors
流体动力和一般用途的金属管接头螺纹液压动力接头的试验方法

SAE J2658_201309

Carbon and Steel Alloy Tube Conductor Assemblies for Fluid Power and General Use - Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies
流体动力和一般用途的碳和钢合金管导体组件.液压流体动力金属管组件的试验方法

BS ISO 6358-1-2013+A1-2020

Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids-General rules and test methods for steady-state flow
气动流体动力使用可压缩流体测定部件的流量特性

GB/T 14513.1-2017

气动使用可压缩流体元件的流量特性测定第1部分：稳态流动的一般规则和试验方法
Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 1: General rules and test methods for steady-state flow

ISO 6358-1-2013

Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow
气动流体动力——用可压缩流体测定部件的流量特性第1部分:稳态流的一般规则和试验方法

BS ISO 6149-4-2006

Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing. Dimensions, design, test methods and requirements for external and internal hex port plugs
流体动力和一般用途的连接端口和螺柱端部采用ISO 261公制螺纹和O形密封圈外部和内部六角端口插头的尺寸、设计、试验方法和要求

BS ISO 9974-4-2016

Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Dimensions, design, test methods and requirements for external hex and internal hex port plugs
一般用途和流体动力的连接端口和螺柱端部采用ISO 261螺纹采用弹性体或金属对金属密封

BS EN ISO 6149-4-2017

Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing-Dimensions, design, test methods and requirements for external hex and internal hex port plugs
流体动力和一般用途的连接带有ISO 261公制螺纹和O形密封圈的端口和螺柱端

BS EN ISO 6149-2-2007

Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing-Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
液压传动和一般用途的连接带有ISO 261公制螺纹和O形密封圈的端口和螺柱端

BS EN ISO 6149-3-2007

Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing-Dimensions, design, test methods and requirements for light-duty (L series) stud ends
液压传动和一般用途的连接带有ISO 261公制螺纹和O形密封圈的端口和螺柱端

SAE J2244/2_200712

Connections for Fluid Power and General Use--Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing Part 2: Heavy-Duty (S Series) Stud Ends--Dimensions, Design, Test Methods, and Requirements
流体动力和通用连接件ISO 261螺纹和O形密封圈的端口和螺柱端第2部分:重型（S系列）螺柱端尺寸、设计、试验方法和要求

ISO 6358-1-2013/Amd 1-2020

Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow — Amendment 1: Effective conductance
有效电导

SAE J2244/3_200712

Connections for Fluid Power and General Use--Ports and Stud Ends with ISO 261 Metric Threads and O-Ring Sealing, Part 3: Light-Duty (L Series) Stud Ends--Dimensions, Design, Test Methods, and Requirements
流体动力和通用连接件ISO 261公制螺纹和O形密封圈的端口和螺柱端第3部分:轻型（L系列）螺柱端尺寸、设计、试验方法和要求

ISO 6149-4-2017

Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
用于流体动力和一般用途的连接 - ISO 261公制螺纹和O形密封圈的端口和螺柱端 - 第4部分:外部六角和内六角螺栓插头的尺寸设计测试方法和要求

ISO 9974-4-2016

Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
一般用途和流体动力的连接 - 具有ISO 261螺纹的端口和螺柱端头具有弹性或金属对金属密封 - 第4部分:外部六角和内六角螺栓插头的尺寸设计测试方法和要求

SAE J2244/4_200712

Connections for Fluid Power and General Use--Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing--Part 4: Heavy-Duty (S Series) External Hex Port Plugs--Dimensions, Design, Test Methods, and Requirements
流体动力和通用连接件ISO 261螺纹和O形密封圈的端口和螺柱端第4部分:重型（S系列）外六角端口插头尺寸、设计、试验方法和要求

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统