Wire thread inserts for ISO metric screw threads - Part 2: Tapped holes for thread inserts, thread tolerances
ISO米制螺纹用钢丝螺纹嵌件.第2部分:螺纹嵌件用螺纹孔.螺纹公差

2005-08-01

Specification for tapping of holes to receive wire thread inserts (ISO metric threads)
用于安装钢丝螺纹嵌件（ISO公制螺纹）的孔攻丝规范

1991-05-31

Tapped Holes for Wire Thread Inserts, (B.S.P.F. Threads), Unplated, Cadmium plated
钢丝螺纹插入件的螺纹孔（B.S.P.F.螺纹） 未镀 镀镉

1955-04-21

Tapped Holes for Wire Thread Inserts, (Unified Threads), Unplated, Cadmium plated
钢丝螺纹插入件（统一螺纹）的螺纹孔 未电镀 镀镉

1969-04-10

安装钢丝螺套螺纹孔用丝锥通用规范
Technical specification for tap usedfor fthreaded hole of the wire thread insert

2004-09-01

Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads)-Diameters below ¼ in
用于安装钢丝螺纹嵌件（UNC和UNF螺纹）的孔攻丝规范 直径小于3/16英寸

1966-01-31

Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads)-Diameters ¼ in and over
用于安装钢丝螺纹嵌件（UNC和UNF螺纹）的孔攻丝规范 直径3/16英寸及以上

1961-08-16

Tapped Hole and Fitted Size Data for Helical Coil Wire Thread Inserts (Metric)
螺旋线圈钢丝螺纹插入件的螺纹孔和配合尺寸数据（公制）

1976-02-11

Tolerances on the threaded portion of taps - Part 6: Ground taps for tapped holes (EG) for wire thread inserts according to DIN 8140 for ISO metric coarse and fine pitch threads; Manufacturing tolerances on the threaded portion
丝锥螺纹部分公差的制造.第6部分:DIN 8140中ISO米制粗牙和细牙螺纹用钢丝螺纹嵌件螺纹孔（EG）用磨制丝锥

2003-07-01

轻合金安装钢丝螺套用内螺纹通孔的机、手用丝锥
Through-hole machine and hand taps of internal screw on light alloy for installing wire thread insert

2004-09-01

普通钢安装钢丝螺套用内螺纹通孔的机、手用丝锥
Through-hole machine and hand taps of internal screw on common stees for installing wire thread insert

2004-09-01

普通钢安装钢丝螺套用内螺纹不通孔的机、手用丝锥
Non through-hole machine and hand taps of internal screw on common stees for installing wire thread insert

2004-09-01

轻合金安装钢丝螺套用内螺纹不通孔的机、手用丝锥
Non through-hole machine and hand taps of internal screw on light alloy for installing wire thread insert

2004-09-01

Machine taps for the tapped holes (EG) for wire thread inserts for ISO metric screw threads according to DIN 8140 - Coarse pitch threads EG M2 to EG M52 and fine pitch threads EG M8 × 1 to EG M48 × 3 - Dimensions
符合DIN 8140标准的ISO公制螺纹用钢丝螺纹嵌件的螺纹孔（EG）机用丝锥-粗节螺纹（如M2至M52）和细节螺纹（如M8×1至M48×3）-尺寸

2003-07-01