1.1 本规程涵盖了用于确定预制骨料（PA）混凝土抗压强度和密度的标准圆柱体的制作程序。 1.2 以国际单位制表示的值应被视为标准。括号中给出的值仅供参考。 1.3 本标准的文本是指提供解释性材料的注释和脚注。这些注释和脚注（不包括表格和图表中的注释和脚注）不应被视为本标准的要求。 1.4 本标准并不旨在解决与其使用相关的所有安全问题（如果有的话）。 本标准的使用者有责任在使用前建立适当的安全、健康和环境实践，并确定监管限制的适用性。 警告-- 新鲜的水硬性水泥混合物具有腐蚀性，长时间接触可能会对皮肤和组织造成化学灼伤。 2. 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 =====意义和用途====== 5.1 本规程用于制作PA混凝土的试验圆柱体或棱柱体。圆柱体用于确定抗压强度和近似密度。从圆柱体上切下的棱柱消除了表面效应，从而更准确地表示了PA混凝土的实际密度。

1.1 This practice covers procedures for making standard test cylinders used to determine the compressive strength and density of preplaced-aggregate (PA) concrete. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 The text of this standard refers to notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Warning— Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure. 2 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 This practice is used for making test cylinders or prisms of PA concrete. Cylinders are used for determining compressive strength and approximate density. Prisms, cut from cylinders, eliminate the surface effect and thus more accurately represent the actual density of PA concrete in place.