KS C IEC 60317-27-2014(2019)-绕组线的特殊类型规范 - 第27部分:纸带覆盖的矩形铜线-国家数字标准馆

现行 KS C IEC 60317-27-2014(2019)

到馆提醒

收藏跟踪

购买正版

개별 권선에 대한 사양 — 제27부: 종이테이프 피복 직각 구리선 绕组线的特殊类型规范 - 第27部分:纸带覆盖的矩形铜线

发布日期： 2014-09-29

                该标准明确了纸带被覆直角铜线的要求。该被覆由同方向被覆的2层以上纸带组成，主要用于油浸变压器线圈绕组。该标准适用的公称导体直径范围如下。宽度2.0毫米以上16.0毫米以下―厚度0.80毫米以上5.60毫米以下适用该标准的纸带在IEC 60554－1中注明，厚度25μm以上125μ限制在m以下的磁带。根据该标准，在提到绕组时，将在说明书中提供以下信息。提及该标准―公称导体尺寸、毫米（宽度）×厚度）-纸张增加公称尺寸

이 표준은 종이테이프 피복 직각 구리 동선의 요건을 명시한다. 이 피복은 동일한 방향으로 피복되는 종이테이프 2겹 이상으로 구성되며, 오일 침지 변압기 코일 권선에 주로 사용한다.이 표준이 적용되는 공칭 도체 지름의 범위는 아래와 같다.― 폭 2.0 mm 이상 16.0 mm 이하― 두께 0.80 mm 이상 5.60 mm 이하이 표준이 적용되는 종이테이프는 IEC 60554－1에 명시하고, 두께가 25 μm 이상 125 μm 이하인 테이프로 제한한다.이 표준에 따라 권선을 언급할 때는 아래 정보를 설명서에 제시한다.― 이 표준에 대한 언급― 공칭 도체 치수, 밀리미터(너비×두께)― 종이로 인한 공칭 치수 증가

分类信息

发布单位或类别：韩国-韩国标准

ICS分类： 29.060.10电线和电缆 - 电线

关联关系

研制信息

相似标准/计划/法规

UNE-EN 60317-27-1999

SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 27: PAPER TAPE COVERED RECTANGULAR COPPER WIRE.
特殊类型绕组线的规范第27部分:纸带包扁铜线

IEC 60317-27-4-2020

Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire
特种绕组线规范第27-4部分:纸带包矩形铝线

IEC 60317-27-3-2019

Specifications for particular types of winding wires - Part 27-3: Paper tape covered rectangular copper wire
特种绕组线规范第27-3部分:纸带包扁铜线

IEC 60317-27-2-2020

Specifications for particular types of winding wires - Part 27-2: Paper tape covered round aluminium wire
特种绕组线规范第27-2部分:纸带包圆铝线

IEC 60317-27-1-2020

Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire
特种绕组线规范第27-1部分:纸带包圆铜线

IEC 60317-27-3-2019+AMD1-2024 CSV

Specifications for particular types of winding wires - Part 27-3: Paper tape covered rectangular copper wire
特种绕组线规范.第27-3部分:纸带包覆矩形铜线

IEC 60317-27-4-2020+AMD1-2024 CSV

Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire
特种绕组线规范.第27-4部分:纸带覆盖的矩形铝线

IEC 60317-27-2-2020+AMD1-2024 CSV

Specifications for particular types of winding wires - Part 27-2: Paper tape covered round aluminium wire
特种绕组线规范.第27-2部分:纸带包裹的圆形铝线

IEC 60317-27-1-2020+AMD1-2024 CSV

Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire
特种绕组线规范第27-1部分:纸带包圆铜线

IEC 60317-27-3-2019/AMD1-2024

Amendment 1 - Specifications for particular types of winding wires - Part 27-3: Paper tape covered rectangular copper wire
修改件1-特殊类型绕组线规范-第27-3部分:纸带覆盖的矩形铜线

IEC 60317-27-4-2020/AMD1-2024

Amendment 1 - Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire
修改件1-特殊类型绕组线规范-第27-4部分:纸带覆盖的矩形铝线

IEC 60317-27-2-2020/AMD1-2024

Amendment 1 - Specifications for particular types of winding wires - Part 27-2: Paper tape covered round aluminium wire
修改件1-特殊类型绕组线规范-第27-2部分:纸带包裹的圆形铝线

IEC 60317-27-1-2020/AMD1-2024

Amendment 1 - Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire
修改件1特殊类型绕组线规范第27-1部分:纸带包覆的圆铜线

BS EN IEC 60317-27-3-2019

Specifications for particular types of winding wires-Paper tape covered rectangular copper wire
特殊类型绕组线规范

BS EN IEC 60317-27-1-2020

Specifications for particular types of winding wires-Paper tape covered round copper wire
特殊类型绕组线规范

BS EN IEC 60317-27-2-2020

Specifications for particular types of winding wires-Paper tape covered round aluminium wire
特殊类型绕组线规范

BS EN IEC 60317-27-4-2020

Specifications for particular types of winding wires-Paper tape covered rectangular aluminium wire
特殊类型绕组线规范

DIN EN IEC 60317-27-3

Specifications for particular types of winding wires - Part 27-3: Paper tape covered rectangular copper wire (IEC 60317-27-3:2019); German version EN IEC 60317-27-3:2019
特种绕组线规范.第27-3部分:纸带包覆的矩形铜线（IEC 60317-27-3-2019）；德文版EN IEC 60317-27-3:2019

DIN EN IEC 60317-27-2-DRAFT

Draft Document - Specifications for particular types of winding wires - Part 27-2: Paper tape covered round aluminium wire (IEC 55/1749/CD:2018); Text in German and English
文件草案.特种绕组线规范.第27-2部分:纸带包覆的圆形铝线（IEC 55/1749/CD:2018）；德语和英语文本

DIN EN IEC 60317-27-1-DRAFT

Draft Document - Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire (IEC 55/1748/CD:2018); Text in German and English
文件草案.特殊类型绕组线规范.第27-1部分:纸带包覆圆铜线（IEC 55/1748/CD:2018）；德语和英语文本

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统