首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 GB/T 35974.3-2018
到馆阅读
收藏跟踪
购买正版
塑料及其衬里制压力容器 第3部分:设计 Plastics and plastic lining pressure vessels—Part 3:Design
发布日期: 2018-02-06
实施日期: 2018-09-01
GB/T 35974 的本部分规定了容器受压元件的设计要求。本部分适用于受内压的塑料及其衬里制压力容器的设计
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
GB/T 35974.5-2018
塑料及其衬里制压力容器 第5部分:塑料衬里制压力容器的制造、检查与检验
Plastics and plastic lining pressure vessels—Part 5: Fabrication, inspection and testing for pressure vessels with plastic lining
2018-02-06
现行
GB/T 35974.4-2018
塑料及其衬里制压力容器 第4部分:塑料制压力容器的制造、检查与检验
Plastics and plastic lining pressure vessels—Part 4: Fabrication, inspection and testing for plastic pressure vessels
2018-02-06
现行
GB/T 35974.2-2018
塑料及其衬里制压力容器 第2部分:材料
Plastics and plastic lining pressure vessels—Part 2: Material
2018-02-06
现行
GB/T 35974.1-2018
塑料及其衬里制压力容器 第1部分:通用要求
Plastics and plastic lining pressure vessels—Part 1: General requirements
2018-02-06
现行
GB/T 23711.3-2019
塑料衬里压力容器试验方法 第3部分:耐高温检验
Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection
2019-12-10
现行
GB/T 23711.4-2019
塑料衬里压力容器试验方法 第4部分:耐负压检验
Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection
2019-12-10
现行
GB/T 23711.6-2019
塑料衬里压力容器试验方法 第6部分:耐压试验
Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing
2019-12-10
现行
GB/T 23711.1-2019
塑料衬里压力容器试验方法 第1部分:电火花试验
Test method for pressure vessels lined with plastics—Part 1:Spark testing
2019-12-10
现行
GB/T 23711.7-2019
塑料衬里压力容器试验方法 第7部分:泄漏试验
Test method for pressure vessels lined with plastics—Part 7:Leakage testing
2019-12-10
现行
GB/T 23711.2-2019
塑料衬里压力容器试验方法 第2部分:耐低温试验
Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing
2019-12-10
现行
GB/T 23711.8-2019
塑料衬里压力容器试验方法 第8部分:耐高电阻试验
Test method for pressure vessels lined with plastics—Part 8:High-resistance testing
2019-12-10
现行
GB/T 4732.5-2024
压力容器分析设计 第5部分:弹塑性分析方法
Pressure vessels design by analysis—Part 5:Elastic plastic analysis method
2024-07-24
现行
GB/T 23711.5-2019
塑料衬里压力容器试验方法 第5部分:冷热循环检验
Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection
2019-12-10
现行
DIN EN 13566-3
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes
地下无压排水和污水管网改造用塑料管道系统.第3部分:紧密配合管道衬里;德文版EN 13566-3:2002
2003-04-01
现行
UNE-EN 13566-3-2003
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes
地下无压排水和污水管网改造用塑料管道系统.第3部分:紧密配合管道衬里
2003-07-30
现行
GB/T 41666.3-2022
地下无压排水管网非开挖修复用塑料管道系统 第 3 部分:紧密贴合内衬法
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks—Part 3: Lining with close-fit pipes
2022-04-15
现行
ISO 11297-3-2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
塑料管道系统 用于在压力下改造地下排水和污水处理网络 - 第3部分:紧密配合的管道衬里
2018-08-31
现行
ISO 11296-3-2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes
塑料管道系统 用于地下非压力排水和污水处理网络的改造 - 第3部分:紧密配合的衬管
2018-07-27
现行
DIN EN ISO 11296-3
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
地下无压排水和污水管网改造用塑料管道系统.第3部分:紧密配合管道衬里(ISO 11296-3-2018)
2019-05-01
现行
DIN EN ISO 11297-3
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
承压地下排水和污水管网改造用塑料管道系统.第3部分:紧密配合管道衬里(ISO 11297-3-2018)
2019-05-01