1.1 本规范旨在评估适用于一般结构用定向刨花板（OSB）与硬质多孔聚苯乙烯绝缘芯材料粘接的粘合剂。 1.2 结构绝缘板（SIP）粘合剂的要求基于粘合剂的性能，通过以下方式测量: 1.2.1 在环境条件下和加速老化后通过压缩载荷抵抗剪切。 1.2.2 在环境条件下和加速老化后的抗拉伸负荷能力。 1.2.3 在环境条件下和加速老化后的静载荷下的抗蠕变（变形）能力。 1.2.4 聚苯乙烯芯材料的拉伸和剪切强度。 1.3 粘合剂配方的分类基于但不限于粘合剂行业公认的通用名称，例如:苯酚间苯二酚、乳液聚合物异氰酸酯、一和二- 部分聚氨酯。出于分类目的，通常还包括粘合剂应用类型和固化术语，例如冷固化苯酚间苯二酚、热固化苯酚间苯二酚和热熔单组分聚氨酯。 1.4 在高温条件下（例如在火灾暴露期间）对粘合剂性能的评估超出了本规范的范围。 1.5 以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.6 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 本规范阐述了用于将定向刨花板（OSB）结构面板饰面材料层压到发泡或挤塑聚苯乙烯芯材料的粘合剂的最低性能标准。粘合剂性能基于模拟潮湿、温度、季节性风化和蠕变的测试。此外，粘合剂要证明其抗氧化、防霉、耐化学试剂以及与特定层压材料的兼容性。 4.2 粘合剂制造商可将本规范用于新产品开发和质量控制目的。 4.3 结构隔热板制造商依赖于粘合剂性能规范，该规范在使用前确定其适用性。 4.4 当根据本规范进行评估时，SIP粘合剂的性能有助于确定粘合剂在制造结构绝缘板时将OSB饰面层压到刚性多孔聚苯乙烯芯材料上的适用性。

1.1 This specification is designed to evaluate adhesives suitable for the bonding of oriented strand board (OSB) to rigid cellular polystyrene insulation core materials for general structure use. 1.2 The requirements of the structural insulated panel (SIP) adhesive are based on the performance of the adhesive as measured by: 1.2.1 Resistance to shear by compression loading in ambient conditions and after accelerated aging. 1.2.2 Resistance to tensile loading in ambient conditions and after accelerated aging. 1.2.3 Resistance to creep (deformation) under static load in ambient conditions and after accelerated aging. 1.2.4 Tensile and shear strength to polystyrene core materials. 1.3 The classification of the adhesive formulation is based on, but not limited to the adhesive’s industry accepted generic names, for example: phenol-resorcinol, emulsion polymer isocyanate, one and two-part urethane. The type of adhesive application and curing terminology are also usually included for classification purposes such as cold-setting phenol resorcinol, heat-cured phenol resorcinol, and hot melt one component urethane. 1.4 Evaluation of adhesive performance at high temperature conditions, such as during a fire exposure, is beyond the scope of this specification. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 This specification addresses minimum performance criteria for adhesives used to laminate oriented strand board (OSB) structural panel facing material to expanded or extruded polystyrene core materials. Adhesive performance is based on tests that simulate exposure to moisture, temperature, seasonal weathering, and creep. Additionally, the adhesive is to demonstrate resistance to oxidation, mold, chemical reagents, and compatibility to the specific laminating materials. 4.2 The adhesive manufacturers can use this specification for new product development and quality control purposes. 4.3 Structural insulated panel manufacturers rely on an adhesive performance specification that determines its suitability before use. 4.4 Performance of the SIP adhesive when evaluated in accordance with this specification aids in determining the suitability of the adhesive for laminating OSB facings to rigid cellular polystyrene core materials in the manufacture of structural insulated panels.