现行

GOST 12776-1967

Опоры реечные. Конструкция и размеры
剥离支撑 设计和尺寸

现行

GOST 18768-1980

Планки поддерживающие. Конструкция и размеры
支撑条设计和尺寸

现行

GOST 19125-1990

Части штуцеров соединительные бортовых авиационных приборов. Конструкция и размеры
机载仪器接头配件 设计和尺寸

现行

GOST 18756-1980

Упоры для фиксации повернутой полосы. Конструкция и размеры
停止转弯条固定 设计和尺寸

现行

GOST 18757-1980

Упоры составные для фиксации повернутой полосы. Конструкция и размеры
复合止挡用于折回条固定 设计和尺寸

现行

DIN 20352

Rock drilling - Sqare driver connection for rotary drilling - Dimensions, design
岩石钻孔.旋转钻孔用Sqare驱动器连接.尺寸和设计

2016-03-01

现行

DIN 20353

Rock drilling - Trapezoidal thread connection for percussive drilling - Dimensions, design
岩石钻孔.冲击钻孔用梯形螺纹连接.尺寸和设计

2016-03-01

现行

GB/T 34744-2017

规格材及齿板连接性能设计值确定方法
Determination method of design values for dimension lumber and truss plate connection

2017-11-01

现行

DIN 20367

Rock drilling - Round screw connections for rotary drilling equipment - Dimensions, design
岩石钻孔.旋转钻孔设备用圆螺纹接头.尺寸和设计

2010-04-01

现行

TB/T 3246.6-2019

机车车辆螺栓连接设计准则 第6部分：连接尺寸
Design guide of bolted joints for rolling stock-Part 6 : Connecting dimensions

2019-06-05

现行

DIN 20316

Rock drilling - Thread connections for thin-walled rotary drilling equipment - Dimensions, design
岩石钻孔.薄壁旋转钻孔设备的螺纹连接.尺寸和设计

2012-11-01

现行

GB/T 6133.2-2006

削平型直柄刀具夹头 第2部分: 夹头的连接尺寸和标记
Tool chucks for flated parallel shank tools - Part 2: Connecting dimensions of chucks and designation

2006-07-20

现行

DIN 20316-DRAFT

Draft Document - Rock drilling - Thread connections for thin-walled rotary drilling equipment - Dimensions, design
文件草案.岩石钻孔.薄壁旋转钻孔设备的螺纹连接.尺寸和设计

2011-11-01

现行

BS ISO 5414-2-2002

Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools-Connecting dimensions of chucks and designation
扁平圆柱柄刀具用带夹紧螺钉的工具夹头（端铣刀夹持器）

2002-11-19

现行

ISO 5414-2-2002

Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 2: Connecting dimensions of chucks and designation
扁平圆柱柄刀具用带夹紧螺钉的刀具卡盘（端铣刀夹持器）第2部分:卡盘的连接尺寸和名称

2002-10-25

现行

GOST ISO 5414-2-2014

Державки с конусом 7:24 и конусом морзе с зажимными винтами для фрез с цилиндрическим хвостовиком с лыской. Часть 2. Присоединительные размеры и обозначение
具有7:24锥柄的支架和带有用于平头平行柄立铣刀的夹紧螺钉的莫氏锥柄 连接尺寸和名称

2014-06-25

现行

DIN 28145-1

Parts welded to glass lined steel agitator vessels - Part 1: Support for baffle Form S for vessels nominal diameter 2400 to 3600 mm; connecting dimensions; interaktive for new design
焊接到搪玻璃钢搅拌容器上的零件.第1部分:公称直径2400至3600 mm的容器用挡板模板S支架；连接尺寸；新设计的互动

1999-11-01

现行

BS ISO 6149-4-2006

Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing. Dimensions, design, test methods and requirements for external and internal hex port plugs
流体动力和一般用途的连接 端口和螺柱端部采用ISO 261公制螺纹和O形密封圈 外部和内部六角端口插头的尺寸、设计、试验方法和要求

2006-06-30

现行

BS ISO 9974-4-2016

Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Dimensions, design, test methods and requirements for external hex and internal hex port plugs
一般用途和流体动力的连接 端口和螺柱端部采用ISO 261螺纹 采用弹性体或金属对金属密封

2016-12-31

现行

BS EN ISO 6149-4-2017

Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing-Dimensions, design, test methods and requirements for external hex and internal hex port plugs
流体动力和一般用途的连接 带有ISO 261公制螺纹和O形密封圈的端口和螺柱端

2017-10-05