首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS ISO 13373-5:2020
到馆提醒
收藏跟踪
购买正版
Condition monitoring and diagnostics of machines. Vibration condition monitoring-Diagnostic techniques for fans and blowers 机器的状态监测和诊断 振动状态监测
发布日期: 2020-06-17
本文件规定了进行振动试验时应考虑的具体程序 各种类型风扇和鼓风机的诊断。 本文件供状态监测从业人员、工程师和技术人员使用 并提供了一种实用的、逐步的、基于振动的故障诊断方法。此外,它还提供了一个 一系列机器和部件类型及其相关故障症状的示例数量。 本文件中给出的方法基于公认的良好实践,由 经验丰富的用户,尽管人们承认还有其他方法。建议的行动 对于特定的诊断,取决于具体情况,故障的置信度 诊断(例如,以前是否正确地对本机器进行了相同的诊断),经验 执行人员、故障类型和严重性以及安全和商业考虑。它是 本文件既不可能也不旨在针对所有情况提出行动建议。购买本文件时可获得的所有当前修订均包含在购买本文件中。
This document sets out the specific procedures to be considered when carrying out vibration diagnostics of various types of fans and blowers. This document is intended to be used by condition monitoring practitioners, engineers and technicians and provides a practical, step-by-step, vibration-based approach to fault diagnosis. In addition, it gives a number of examples for a range of machine and component types and their associated fault symptoms. The approach given in this document is based on established good practice, put together by experienced users, although it is acknowledged that other approaches can exist. Recommended actions for a particular diagnosis depend on individual circumstances, the degree of confidence in the fault diagnosis (e.g. has the same diagnosis been made correctly before for this machine), the experience of the practitioner, the fault type and severity as well as on safety and commercial considerations. It is neither possible nor the aim of this document to recommend actions for all circumstances.All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
BS ISO 13373-3-2015
Condition monitoring and diagnostics of machines. Vibration condition monitoring-Guidelines for vibration diagnosis
机器的状态监测和诊断 振动状态监测
2015-10-31
现行
BS ISO 13373-1-2002
Condition monitoring and diagnostics of machines. Vibration condition monitoring-General procedures
机器的状态监测和诊断 振动状态监测
2002-04-30
现行
BS ISO 13373-9-2017
Condition monitoring and diagnostics of machines. Vibration condition monitoring-Diagnostic techniques for electric motors
机器的状态监测和诊断 振动状态监测
2017-10-25
现行
BS ISO 18436-2-2014
Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel-Vibration condition monitoring and diagnostics
机器的状态监测和诊断 人员资格和评估要求
2014-08-31
现行
KS B ISO 13373-3
기계의 상태 감시와 진단 — 진동 상태 감시 — 제3부:진동 진단을 위한 지침
机器状态监测和诊断 - 振动状态监测 - 第3部分:振动诊断指南
2018-03-22
现行
KS B ISO 13373-3
기계의 상태 감시와 진단 — 진동 상태 감시 — 제3부: 진동 진단을 위한 지침
机械状态监测和诊断振动状态监测第3部分:振动诊断指南
2023-12-29
现行
BS ISO 13373-2-2016
Condition monitoring and diagnostics of machines. Vibration condition monitoring-Processing, analysis and presentation of vibration data
机器的状态监测和诊断 振动状态监测
2016-02-29
现行
GB/T 19873.3-2019
机器状态监测与诊断 振动状态监测 第3部分:振动诊断指南
Condition monitoring and diagnostics of machines—Vibration condition monitoring—Part 3:Guidelines for vibration diagnosis
2019-12-31
现行
GOST R ISO 13373-3-2016
Контроль состояния и диагностика машин. Вибрационный контроль состояния машин. Часть 3. Руководство по диагностированию по параметрам вибрации
机器的状态监测和诊断 振动状态监测 第3部分振动诊断指南
现行
ISO 13373-3-2015
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 3: Guidelines for vibration diagnosis
机器状态监测和诊断 - 振动状态监测 - 第3部分:振动诊断指南
2015-09-14
现行
ISO 13373-5-2020
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 5: Diagnostic techniques for fans and blowers
机器的状态监测和诊断 - 振动状态监测 - 第5部分:风扇和鼓风机的诊断技术
2020-06-11
现行
ISO 13373-9-2017
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9: Diagnostic techniques for electric motors
机器状态监测和诊断 - 振动状态监测 - 第9部分:电动机诊断技术
2017-10-09
现行
KS B ISO 13373-1
기계의 상태 감시 및 진단 — 진동 상태 감시 — 제1부: 일반 지침
机器的状态监测和诊断 - 振动状态监测 - 第1部分:一般程序
2019-11-30
现行
GB/T 19873.1-2005
机器状态监测与诊断 振动状态监测 第1部分:总则
Condition monitoring and diagnostics of machines-Vibration condition monitoring-Part 1:General procedures
2005-08-31
现行
GOST R ISO 13373-1-2009
Контроль состояния и диагностика машин. Вибрационный контроль состояния машин. Часть 1. Общие методы
机器的状态监测和诊断 振动状态监测 第二部分一般程序
现行
ISO 13373-1-2002
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 1: General procedures
机器的状态监测和诊断——振动状态监测第1部分:一般程序
2002-02-28
现行
KS B ISO 18436-2(2021 Confirm)
기계의 상태 감시 및 진단-요원의 훈련 및 검정에 대한 요구 사항-제2부:진동의 상태 감시 및 진단
机器状态监测和诊断人员培训和认证要求第2部分:振动状态监测和诊断
2016-12-29
现行
KS B ISO 18436-2
기계의 상태 감시 및 진단-요원의 훈련 및 검정에 대한 요구 사항-제2부:진동의 상태 감시 및 진단
机械状态监测和诊断人员培训和认证要求第2部分:振动状态监测和诊断
2016-12-29
现行
JIS B 0912-2-2009
Condition monitoring and diagnostics of machines -- Requirements for training and certification of personnel -- Part 2: Vibration condition monitoring and diagnostics
机器状态监测和诊断人员培训和认证要求第2部分:振动状态监测和诊断
2009-01-01
现行
GB/T 23718.2-2009
机器状态监测与诊断 人员培训与认证的要求 第2部分:振动状态监测与诊断
Condition monitoring and diagnostics of machines - Requirements for training and certification of personnel - Part 2: Vibration condition monitoring and diagnostics
2009-05-11